Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] Re: Tony -- your keg

Expand Messages
  • Reima
    BSM/RJT MILK FITTINGS at http://www.midwaymetals.com.au/products1.htm a 4 one is $55 + GST in Queensland ... From: Donavan Stewart To:
    Message 1 of 11 , Apr 23, 2002
    • 0 Attachment
      BSM/RJT MILK FITTINGS at http://www.midwaymetals.com.au/products1.htm a 4" one is $55 + GST in Queensland
      ----- Original Message -----
      Sent: Tuesday, April 23, 2002 7:40 PM
      Subject: Re: [new_distillers] Re: Tony -- your keg

      4 inch rjt fittings are a good size. I have big forearms and i can get right in to clean every part of the keg. Working in a sheetmetal firm helped find the fittings easier. I paid NZ$120 (staff rates). You can get them second hand  at a scrappy for about $20
      ----- Original Message -----
      From: dave
      Sent: Tuesday, April 23, 2002 8:17 PM
      Subject: Re: [new_distillers] Re: Tony -- your keg

      100 mm rjt or triclover welded into the top gives a beautifull seal and easy access for cleaning purposes..........you wont have to take ti to the carwash anymore to clean it:)
      dave t
      ----- Original Message -----
      From: tony6163
      Sent: Monday, April 22, 2002 7:21 PM
      Subject: [new_distillers] Re: Tony -- your keg

      --- In new_distillers@y..., B13013ob@c... wrote:
      >
      >     Hi Tony,  My curiosity to you is how do you make a keg
      available for
      > cleaning but still remain sealed from gas loss with a removable
      connection
      > for the column? I know where a SS keg is, but none of the info I've
      learned
      > to make it usable is acceptable for that access, my budget or
      imagination. I
      > like clean stuff and a small access is difficult. Got an idea? Hey
      group,
      > I'll take your recommendations... Gotta move up from 20L. Thanks in
      > advance......bob ........

      Well Bob I was just going to follow the instructions at moonshine-
      still.com and buy a large S/S mixing bowl with a flange suitable for
      bolting it to the keg then the column goes on the top of that. Then I
      can have an 8" dia. hole in the top of the keg. Plenty of room for
      cleaning then !

      Tony


      To unsubscribe from this group, send an email to:
      new_distillers-unsubscribe@onelist.com



      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

      To unsubscribe from this group, send an email to:
      new_distillers-unsubscribe@onelist.com



      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

      To unsubscribe from this group, send an email to:
      new_distillers-unsubscribe@onelist.com



      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
    Your message has been successfully submitted and would be delivered to recipients shortly.