Re: Nasty Taste!
- there is plenty of neutral cure silicone available in the US, check this out.
--- In firstname.lastname@example.org, Rasputin Paracelsus <rasputin@...> wrote:
> It's a small consolation to me that you couldn't get the proper silicone
> from Fastenal, I couldn't either :(
> There are those silicone baking sheets, though. A mite more money, but
> I'm seriously thinking about getting one.
> rye_junkie1 wrote:
> > --- In email@example.com, Rasputin Paracelsus <rasputin@> wrote:
> >> Never worked for me... Not a great seal, and shrank when I removed it.
> >> (Might not have if I had let it cool first, don't know. But didn't feel
> >> like trying it again as it didn't work well.)
> >> And I gather from an earlier round of discussions on this topic that
> >> that is not an uncommon experience. Glad it worked for you, though!
> >> R
> > Cork never worked for me either. Had similar issues to yours R.
> > Sink strainer: get rid of the JB weld and get a oring from a hydraulic shop. Buna or Silicone Put the oring between the strainer and the underside of the lid. If the hole you cut for the strainer is pretty precise then I would also try wrapping the hell out of the strainer with Teflon tape where it contacts the boiler lid. The lid I have that uses a strainer I machined and precisely to the middle of the curve at the flange. It doesnt require a separate seal.
> > Lid to boiler seal: Flour and water paste or if you are in Aus or new zealand pick up some of that sealys stuff Harry talks about. Good luck finding Neutral cure here in the US. My fastenal Rep is a White lightning silicone distributor and he couldnt get his hands on the right stuff. Aquarium sealant is an acetic cure. Use at your own risk. I'll save mine for the fish.
> > Mason