Re: Educate me on Internal Heaters for my Boiler
- While we are on the subject...
For those of you who are using hot plates (and are running 120 v electricity) can you offer some advice on which hot plates to consider for running a PDA-1?
Sorry if this was already covered in an earlier thread...
--- In firstname.lastname@example.org, "sosburner@..." <sosburner@...> wrote:
> Check homedistiler.org for still plans. The internal heating elements have to screw into a flange that is welded to go through the still wall and be water tight. Wiring is simple as 120 has only two wires. Control is another story.