- hello all
I am building a new stainless steel still.There are a few problems
though. The boiler is 60L SS beer keg and the tower is 2 inch pipe.
The problem is the pipe it is only 3 feet long, is that long enuff.
I am planing on using copper pot scrubbers up to about 2 1/2 feet,but
am not sure if the tower can handle the volume form the boiler.If
anyone can help it would be nice.
Other than that I am using 2 3000w elements to heat on 220v. the
tower is machined and will screw in to the top of the boiler. I found
a hand drill pump at a hardware store and am planing on placing a pail
outside and circulating the water for cooling(I'm in Canada it is cold
- I have used it both ways, today I ran the last of 55 gallons of UJSM and did it in my reflux still with the valve fully open. I got almost two gallons out of 12 gallons of distillate. It went from 70 down to 30 when I cut it off. All mixed together it comes out at about 45% and it tastes great! Made apple pie out of it and and it is very nice!James D. Graves
Ravenwood Solutions, llc.
From: chris <gonagin58@...>
Sent: Friday, February 1, 2013 10:19 AM
Subject: [new_distillers] Re: new still
Were you using a pot still or reflux?
--- In email@example.com, Jim Graves wrote:
> Do your self a favor and don't use any yeast with the word "turbo" in it, it leaves a terrible taste! Â Use Lavin 1118 wine yeast, no taste!
> James D. Graves
> Ravenwood Solutions, llc.
> From: chris
> To: firstname.lastname@example.org
> Sent: Thursday, January 31, 2013 11:35 AM
> Subject: [new_distillers] new still
> Ahoy Ahoy All,
> Yesterday I had a friend weld 4 stainless steel studs to the top of my pot and helped me build the burner out of an old rim. Last night I fired every thing up with a dilute vinegar to clean everything out. The old rim had a bunch of road grime and filth on it and I endeavoured to persevere the smoke and stink it was putting out and it gradually cleaned itself up and is OK now. Boiled it hard for about an hour with no coolant, it was belching steam, then rinsed everything out with fresh water. It's pretty chilly here and was having trouble getting it to start producing steam then I wrapped the column with a burlap sack I had laying around and the temperature shot up within 5 minutes. I see what everybody means about insulating the column. I still need to get some cooling lines for the condenser and I'll be all set. Next step is to start my sugar wash with Turbo classic and figure out a way to keep it warm for a week or so. I'm thinking an old waterbed
> heater and a blanket. I can't keep it in the house because it's not warm enough in here either. I bought a couple of 5 gallon jugs to ferment in but I see the Turbo says I need 5 1/2 gallons, guess I need bigger jugs, (snicker, snicker). Anyhow, any thoughts, suggestions or tips would be appreciated.
> Thanks to All