Loading ...
Sorry, an error occurred while loading the content.

Re: Column vent tubes for the shot gun / cross flow condenser

Expand Messages
  • mavnkaf
    Thanks Stevo for your help, It seems DSE don t have the BTA140-600 but I did find a mob called Rockby Electronics in Melbourne have them for $7 dollars
    Message 1 of 8 , May 1, 2006
    View Source
    • 0 Attachment
      Thanks Stevo for your help,

      It seems DSE don't have the BTA140-600 but I did find a mob called
      Rockby Electronics in Melbourne have them for $7 dollars something.
      It would be much safer to get it.

      Cheers
      Marc

      --- In new_distillers@yahoogroups.com, "stevolate" <stevolate@...>
      wrote:
      >
      > Hi Marc
      > I just found some info Mike N sent to me.
      > My electronics guy agreed with Mike. His message below.
      >
      > One small modification you might consider though change the triac
      you
      > are using from a BT139-600 16amp to a BTA140-600. It has the same
      > current and voltage rating, and is identical except in one
      important
      > respect it has internal ceramic insulation that prevents mains
      voltage
      > being connected to the metal backing tab. As the triac is attached
      to
      > the heat sink by this tab, this means that you will no longer have
      a
      > "live" heat sink, and your controller will be a lot safer to
      handle.
      >
      > All the best,
      > Mike N
      >
      >
      >
      > > Hi Stevo,
      > >
      > > Stevo I found it through the archives, where and when, don't
      know.
      > It's one
      > > of the problems of a big data base. Gees, sorry Stevo it's not
      your
      > fault.
      > >
      > > Drink just finisnhed
      > > Marc
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.