Loading ...
Sorry, an error occurred while loading the content.
 

Handling coolant (was) Re: corn whiskey recipe

Expand Messages
  • Kim
    OK I m looking.....I m looking for one ;-) Kim
    Message 1 of 13 , Dec 30 6:19 AM
      OK

      I'm looking.....I'm looking for one ;-)

      Kim


      --- In new_distillers@yahoogroups.com, "Cary Rhodes" <rhodeseng@y...>
      wrote:
      >
      > Kim
      >
      > A heater core from a larger vehicle, like a truck, or something makes
      > a good radiator.
      >
      > looks just like the coolant radiator on the front of a vehicle, but
      > is used for the heat exchanger inside the cab.
      >
      > It will flow good volume without the restrictions in airconditioning
      > condensors/evaporators.
      >
      > cary r
      >
      >
      >
      > --- In new_distillers@yahoogroups.com, "Kim" <kiss_my_ass@c...> wrote:
      > >
      > > Harry...
      > >
      > > I tried an air conditioner coil but it was too small....I tried a
      > coil
      > > of copper tubing but it doesn't act as a very good heat exchanger
      > with
      > > out fins of some kind...I am holding out for a car radiator but
      > > haven't found one yet.....I will do a heat exchanger like you
      > suggest
      > > if I ever get the parts...
      > >
      > > Kim
      > >
      > > --- In new_distillers@yahoogroups.com, "Harry" <gnikomson2000@y...>
      > wrote:
      > > >
      > > > --- In new_distillers@yahoogroups.com, "Kim" <kiss_my_ass@c...>
      > > > wrote:
      > > > >
      > > > > Harry....
      > > > >
      > > > > The coolant flow is about 3 gal per minute. I use a 20 gallon
      > > > > container and recirculate it.....when the water gets hot, I
      > change
      > > > it
      > > > > out with new from the tap....I need to change the tank about 3
      > > > times
      > > > > per run.....
      > > > >
      > > > > have a happy new year....
      > > > > and thanks for the hard work on the forum and the ideas for the
      > > > hobby
      > > > > (to all the other contributors too)
      > > > >
      > > > > Kim
      > > >
      > > >
      > > >
      > > > Kim,
      > > > You could solve your changeout problem if you employ some form of
      > > > heat extraction from the reservoir. This is my solution ...
      > > > http://www.geocities.com/gnikomson2000/recycled_water.jpg
      > > >
      > > > My coolant flow is about 6 litres/min but I'm going for cheap
      > > > operation. Hence the 23w pump and 54w fan. If your pump does 3
      > > > gal/min then an extractor fan would give you the increased
      > cooling
      > > > necessary for the faster flowrate. End result is no changeout of
      > > > coolant, for slight increase in power costs (in my case,
      > 77w...less
      > > > than a household light globe). It's cheaper and more eco-
      > friendly
      > > > than buying the water to waste.
      > > >
      > > > Happy New Year to you also, and everyone else here.
      > > >
      > > > Slainte!
      > > > regards Harry
    Your message has been successfully submitted and would be delivered to recipients shortly.