Loading ...
Sorry, an error occurred while loading the content.

RE: [new_distillers] Right angle ¼? Needle Valves to a 2" copper cap

Expand Messages
  • Ackland, Tony (CALNZAS)
    Bill ... I ve put a small length (1-2 ) of 10mm tubing between the container and the valve. It gives me room to move. I ve soldered the pipe to the container,
    Message 1 of 1 , Oct 2, 2001
    • 0 Attachment
      Bill

      > I am currently building a valved reflux still and have some
      > problems sourcing suitable needle valves in the UK and then
      > fitting right angle ¼" Needle Valves to a 2" copper cap
      > so they are flush with the inside of the cap and the outlet to go to
      > 8mm copper pipe.
      > Please does anyone have any ideas

      I've put a small length (1-2") of 10mm tubing between the container and the
      valve. It gives me room to move. I've soldered the pipe to the container,
      and will do a standard compression fitting into the valve.

      Tony
    Your message has been successfully submitted and would be delivered to recipients shortly.