Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] Re: Preparing copper tubing for use

Expand Messages
  • David Lunsford
    Take a long piece of string and tie a small piece of cloth in the middle, and a nail to one end, drop nail through hose, pulling cloth through, pull back and
    Message 1 of 11 , May 9, 2004
    • 0 Attachment
      Take a long piece of string and tie a small piece of cloth in the middle,
      and a nail to one end, drop nail through hose, pulling cloth through, pull
      back and forth if needed, like cleaning a gun barrel, rinse with vinegar,
      then water....Dave









      At 01:47 AM 5/9/2004 -0000, you wrote:
      > --- In new_distillers@yahoogroups.com, Michael Horowitz
      ><> wrote:
      >> Before first use of copper tubing, do you do anything by way of
      >> cleaning/flushing it out? assume no soldering of flux involved. -
      > Mike
      >
      > Wash through with dilute vinegar. If actually dirty, let dilute
      > vinegar sit in the pipe for a half hour or so. Rinse thoroughly.
      >
      > Jim Puchai.
      >
      >
      >
      > New Distillers group archives are at http://archive.nnytech.net/
      > FAQ and other information available at http://homedistiller.org
      >
      >
      >
      >
      > Yahoo! Groups Sponsor ADVERTISEMENT
      >
      > Yahoo! Groups Links
      > To visit your group on the web, go to:
      >http://groups.yahoo.com/group/new_distillers/
      > To unsubscribe from this group, send an email to:
      >new_distillers-unsubscribe@yahoogroups.com
      > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.