Loading ...
Sorry, an error occurred while loading the content.

Re: Need a hot plate.....

Expand Messages
  • brewhausinc
    Not a problem at all. If you have any problems, just let me know. :- ) ... heat, ... constantly. ... temp ... to ... you ... person ... a ...
    Message 1 of 7 , Feb 14, 2004
    • 0 Attachment
      Not a problem at all. If you have any problems, just let me know. :-
      )

      --- In new_distillers@yahoogroups.com, "seeker" <seeker@n...> wrote:
      > thank you for the info,much appreciated
      > ----- Original Message -----
      > From: "brewhausinc" <rmorris@b...>
      > To: <new_distillers@yahoogroups.com>
      > Sent: Saturday, February 14, 2004 2:38 PM
      > Subject: [new_distillers] Re: Need a hot plate.....
      >
      >
      > > There are some instructions on doing this at
      > > www.brewhaus.com/Hotplate-Adaptation/Hotplate_Adaptation.htm
      > >
      > > --- In new_distillers@yahoogroups.com, "seeker" <seeker@n...>
      wrote:
      > > > how does one bypass the thermostat?
      > > > ----- Original Message -----
      > > > From: "brewhausinc" <rmorris@b...>
      > > > To: <new_distillers@yahoogroups.com>
      > > > Sent: Friday, February 13, 2004 10:24 PM
      > > > Subject: [new_distillers] Re: Need a hot plate.....
      > > >
      > > >
      > > > > Actually, those units work well and give a good level of
      heat,
      > > but
      > > > > you must bypass the thermostat so that it remains on
      constantly.
      > > > > That should knock your heat up time down to between 1 and 1.5
      > > hours.
      > > > >
      > > > > --- In new_distillers@yahoogroups.com, "seeker" <seeker@n...>
      > > wrote:
      > > > > > i can tell you one NOT to get,called an "eclipse",by
      > > > > toastmaster,sold on
      > > > > > various brewing sites,took me over 5 hrs. to get it up to
      temp
      > > w/a
      > > > > 6 gal.
      > > > > > boiler,then another 2-3 hrs to finish,i since have switched
      to
      > > a
      > > > > propane
      > > > > > burner,takes approx. 30-40 minutes on very low setting,but
      you
      > > have
      > > > > to be
      > > > > > very careful w/an open flame around,i was told by one
      person
      > > they
      > > > > just went
      > > > > > to either k-mart,or walmart and purchased one cheap,mine is
      a
      > > 30.00
      > > > > piece of
      > > > > > junk
      > > > > > ----- Original Message -----
      > > > > > From: "woof117" <woof117@y...>
      > > > > > To: <new_distillers@yahoogroups.com>
      > > > > > Sent: Tuesday, February 10, 2004 5:47 PM
      > > > > > Subject: [new_distillers] Need a hot plate.....
      > > > > >
      > > > > >
      > > > > > > Could someone please reccomend a decent hot plate strong
      > > > > > > enough to hold and make a 25 liter batch. All suggestions
      > > > > > > appriciated.....Thanks
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > > New Distillers group archives are at
      > > http://archive.nnytech.net/
      > > > > > > FAQ and other information available at
      > > http://homedistiller.org
      > > > > > >
      > > > > > >
      > > > > > > Yahoo! Groups Links
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > >
      > > > >
      > > > >
      > > > > New Distillers group archives are at
      http://archive.nnytech.net/
      > > > > FAQ and other information available at
      http://homedistiller.org
      > > > >
      > > > >
      > > > > Yahoo! Groups Links
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > >
      > >
      > >
      > > New Distillers group archives are at http://archive.nnytech.net/
      > > FAQ and other information available at http://homedistiller.org
      > >
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      > >
      > >
    Your message has been successfully submitted and would be delivered to recipients shortly.