Loading ...
Sorry, an error occurred while loading the content.

3833New Distillers FAQ

Expand Messages
  • Tony & Elle Ackland
    May 8, 2002
    • 0 Attachment
      "NEW DISTILLERS" Frequently Asked Questions (Sept'01)

      Posted near the 1st of each month, to the NEW_DISTILLERS newsgroup at
      www.yahoogroups.com

      Please email any additions, corrections, clarifications required, etc
      regarding the FAQ to Tony Ackland (ackland@...), however please
      direct any general questions to the newsgroup itself.

      *******************************************************************

      1) Is distilling hard to do ?
      2) Is it legal ?
      3) Will it make me blind ?
      4) Whats the difference between a pot still, reflux still, and
      fractionating column ?
      5) How do I get or make a still ?
      6) How do I make a whisky / rum / vodka / gin ?
      7) Should I use sugar or grains ?
      8) Can I use fruit wine ?
      9) How do I get rid of that "off-taste" ?
      10) How do I measure the strength of it & dilute it ?
      11) How do I flavour/turn the vodka's into something else ?
      12) What web resources are there ?
      13) How do I contact the NEW DISTILLERS news group ?
      14) Can I run my car on it ?
      15) How do I convert between gallons and litres and ....
      16) What is a "Thumper" ?
      17) Can I use a reflux still to make rum or whisky ?

      **********************************************************************

      1) Is distilling hard to do ?

      Nope - if you can follow instructions enough to bake scones, then you can
      sucessfully distil. To distil well however, will require you to understand
      what you're doing, so read around and get a bit of information under your
      belt before you begin.

      2) Is it legal ?

      Probably not. It is only legal in New Zealand, and some European countries
      turn a blind eye to it, but elsewhere it is illegal, with punishment
      ranging from fines to imprisonment or floggings. This action against it is
      usually the result of either religous beliefs (right or wrong), but more
      generally due to the great revenue base it provides Governements through
      excise taxes. So if you are going to distil, just be aware of the potential
      legal ramifications.

      3) Will it make me blind ?

      Not if you're careful. This pervasive question is due to moonshine lore,
      which abounds with myths of blindness, but few actual documented cases. The
      concern is due to the presence of methanol (wood alcohol), an optic nerve
      poison, which can be present in small amounts when fermenting grains or
      fruits high in pectin. This methanol comes off first from the still, so it
      is easily segregated and discarded. A simple rule of thumb for this is to
      throw away the first 50 mL you collect (per 20 L mash used). Probably the
      greatest risk to your health during distilling is the risk of fire -
      collecting a flammable liquid near a heat source. So keep a fire
      extinguisher nearby.

      4) Whats the difference between a pot still, reflux still, and
      fractionating column ?

      A pot still simply collects and condenses the alcohol vapours that come off
      the boiling mash. This will result in an alcohol at about 40-60% purity,
      with plenty of flavour in it. If this distillate were put through the pot
      still again, it would increase in purity to around 70-85% purity, and lose
      a bit of its flavour.

      A reflux still does these multiple distillations in one single go, by
      having some packing in a column between the condensor & the pot, and
      allowing some of the vapour to condense and trickle back down through the
      packing. This "reflux" of liquid helps clean the rising vapour and increase
      the % purity. The taller the packed column, and the more reflux liquid, the
      purer the product will be. The advantage of doing this is that it will
      result in a clean vodka, with little flavour to it - ideal for mixing with
      flavours etc.

      A fractionating column is a pure form of the reflux still. It will condense
      all the vapour at the top of the packing, and return about 9/10 back down
      the column. The column will be quite tall - say 600-1200mm (2-4 foot), and
      packed with a material high in surface area, but which takes up little
      space (pot scrubbers are good for this). It will result in an alcohol 95%+
      pure (the theoretical limit without using a vacuum is 96.48 %(by volume)),
      with no other tastes or impurities in it.

      5) How do I get or make a still ?

      If you're after a pot still, these are generally home made using what-ever
      you have at hand - say copper tubing and old water heaters or pressure
      cookers. Reflux stills can be made from plans on the net, or bought from
      several manufacturers. For reflux stil plans see Stillmakers "Build a World
      Class Distillation Apparatus" at http://www.Moonshine-Still.com (Free!) or
      Gert Strands : http://partyman.se/Engelsk/default.htm (US$5). A good book
      is Ian Smileys "Making Pure Corn Whisky" at
      http://www.magma.ca/~smiley/main.htm, with full design details. For an
      excellent book on all aspects of still design, see "The Compleat Distiller"
      at http://www.amphora-society.com See the list of "web resources" below
      for links to sites selling ready-made stills. For fuel alcohol stills see
      the Mother Earth Alcohol Fuel manual at
      http://journeytoforever.org/biofuel_library/ethanol_motherearth/meToC.html,
      and the The Manual for the Home and Farm Production of Alcohol Fuel by S.W.
      Mathewson at
      http://journeytoforever.org/biofuel_library/ethanol_manual/manual_ToC.html
      Regarding the choice of heating for the still - if you have 240V available
      it is usually easiest to control & safer (particularly with internal
      elements). Gas can be used, but more care is needed to keep the collection
      container further away and not letting it overfill.

      6) How do I make a whisky / vodka / rum / gin ?

      Whiskey : Heat 4 kg cracked or crushed malt with 18 L of water to 63-65C,
      and hold there for 1-1.5 hours. Heat to 73-75C, then strain off and keep
      liquid, using 250 mL of hot water to rinse the grains. Cool to below 30C
      (should have an initial specific gravity of 1.050). Add hydrated yeast &
      leave to ferment (maintain at 26C) until airlock stops bubbling and final
      SG of around 1.010. Let settle for a day, then syphon carefully into a pot
      still. Discard the first 50 mL's, collect the next 2-3L of distillate or
      until you start noticing the tails coming through.

      Vodka : dissolve 5 kg of sugar & 60g of nutrients in 20L of water, cool to
      below 30C and add hydrated yeast. Leave to ferment at 25C until below an SG
      of around 0.990, then settle for a day. Syphon into a reflux or
      fractionating still, and collect as per usual.

      Rum : as per vodka, but use some brown sugar or mollasses, to give an
      initial specific gravity (SG) of around 1.06 - 1.07. Run through either a
      pot still, or a not-so-great reflux still.

      Gin : make a very pure vodka, then add the following essence. Simmer 35g of
      juniper berries in 350 mL of 50% vodka for ten minutes with the lid on, let
      cool overnight, then filter through coffee filters. Use 5-10 mL of this
      essence per bottle of vodka.

      When doing any fermenting, take a lot of care to ensure that any items used
      are clean/sterile (soaking them in a water + bleach (10 mL per litre) ), or
      else the wash can start growing other things. Use a closed fermenter with
      an airlock too, to let the CO2 out without letting wild yeasts, bugs etc
      in. For more information about fermenting, see beer or wine homebrewing
      sites.

      7) Should I use sugar or grains/fruit ?

      It depends on what sort of still you have, and what you are trying to make.
      If you have a reflux or fractionating still, only use whatever is cheapest
      (usually sugar), as the refluxing will strip out all the flavours anyhow.
      If you have a pot still, and are after a bourban or whiskey, then you need
      to go the grain route, or mollasses if after a rum. If you are trying to
      make a neutral spirit for flavouring, go for sugar.

      Basic guidelines for using them are ..
      SUGAR. Wine yeast can use no more than 2.5lbs of sugar/1imp gal or
      2.2lb/1U.S.gal or 1.25kg/5litres of must. This will produce 14%a.b.v. Honey
      and liquid malt extract are 80% sugar so you need 1.5kg/5l must or mash.
      Molasses is 50% sugar so you need 2.5kg/5l must or mash. Maple syrup is 32%
      sugar. Carob beans are 45% sugar. Sugar beets are 15% sugar Grain malt is
      60% sugar (starch converted to sugars) so you need 1.5kg/5l mash. Cooked
      grain contains 60% convertible starch so you need 1.5kg/5l mash
      FRUIT - Grapes contain the ideal sugar, water, acid balance. A sugar
      content of 17-23% and a water content of about 80%. 8kg of grapes produces
      5l of wine. Most common fruits (apples, plums, apricots) contain about 10%
      sugar and 85% water. Cherries and figs contain 15% sugar. A fruit mash
      could be 4kg fruit, (400g sugar content), 2l water (3l in pulp already),
      800g additional sugar. Bananas are 17-24% sugar, 75% water. Acid content
      0.3%. A banana mash could be 4kg of cooked bananas, 2l water (3l in pulp
      already),400g sugar. Add 3lemons/5l for correct pH. Dates are 70% sugar,
      20% water. Add acid to a date mash. Raisins and sultanas have a water
      content of about 15% and a sugar content of 60%, grapes have a water
      content of 75% and a sugar content of about 20%, so using 1.5-2kg/5l of
      water appears about right if we want to reconstitute them.
      ACID - 5g of citric acid (1tsp)/5l must raises acidity by 0.1%. 3g of
      calcium carbonate powder lowers acidity by 0.1%. A pH of 5 is 0.4% acidity.
      Winemakers aim for 0.6% acidity. Most common fruits are about 0.6% acid
      content. For distilling, a higher acidity in the mash helps to suppress
      bacteria. A high tannin content doesn't matter as we are not making wine.
      Meaurements are logarithmic, so a pH of 4 is 10 times more acidic than a pH
      of 5.
      YEAST - Brewers (& possibly baker's yeast) can tolerate only 8% alcohol. A
      bottom fermenting lager yeast ferments out all the sugars better than a top
      fermenting ale yeast. A good wine yeast (Champagne, in the right
      conditions, can tolerate 15%a.b.v. (up to 18%a.b.v. in optimal conditions -
      no need to use expensive turbos). Wild yeasts vary, but some are very low -
      this is a risky path. Whisky distillers often use a combination of yeasts -
      initially a brewer's yeast because they believe it effects the flavor.

      8) Can I use fruit wine ?

      Sure, if you have it available. Again, using a pot still will result in a
      brandy/grappa/schnapps, whereas a reflux still will just strip it down to
      neutral spirit.

      9) How do I get rid of that "off-taste" ?

      That "rough moonshine edge" or "off-taste / wet cardboard smell" is due to
      impurities such as the higher order alcohols, known as cogeners or fusel
      oils. These will be present more when using a pot still, less if using a
      reflux still, and just about absent if using a fractionating column. So one
      way is to use a taller packed column and increase the amount of reflux
      occuring. They can also indicate that you've tried to collect too much of
      the alcohol, and have run into the "tails"; so finish collecting a little
      bit earlier next time. Soaking tainted alcohol with activated carbon for a
      week (or even months) will help remove some of this flavour - this is known
      as "polishing" the spirit. I'm also suspecting that you need a little bit
      of copper somewhere in the still where it can come in contact with the
      vapour. The copper helps catalyse some of the sulphur, esters & organic
      acids, reducing their odour & taste.

      10) How do I measure the strength of it & dilute it ?

      You need a hydrometer. This is a wee float, with a scale inside it. The
      more alcohol that is present, the lighter the density of the liquid, so the
      hydrometer sinks a bit lower. You then just read off the scale how much
      alcohol is present. You need a seperate hydrometer for measuring the
      density of the mash, as this is generally > 1.0, whereas the spirit is <
      1.0, and they can't accurately do both ends of the scale.

      11) How do I flavour/turn the vodka's into something else ?

      There are now many commercial flavourings available, which turn vodka or
      neutral alcohol into pretty decent gin or whiskey, or all manor of
      liqueurs. See the commercial sites, like Des Zines
      http://homepages.ihug.co.nz/~topkiwi or Ray Toms http://moonshine.co.nz/
      for details. Or you can soak it with oak chips and make whiskey, or soak
      fruits in it to make your own liqueurs.

      12) What web resources are there ?

      For more details, see :
      Tony Ackland's http://homedistiller.org
      Aaron Smiths's http://www.go.to/distillation
      Steve Spence's http://www.webconx.com/ethanol.htm
      StillMaker's http://www.Moonshine-Still.com
      Biofuels Library http://journeytoforever.org/biofuel_library.html

      13) How do I contact the NEW DISTILLERS news group ?

      Both the NEW DISTILLERS and the DISTILLERS news groups are available via
      YahooGroups, at http://www.yahoogroups.com . NEW DISTILLERS is, as the name
      suggests, intended for those of you new to distilling and after simple,
      straight-forward discussions, whereas the DISTILLERS group is a bit more
      advanced, throwing in bits of design philosophy, theory, and alternative
      ways of achieving the results. Both tend to overlap to some extent.

      14) Can I run my car on it ?

      You can run your car on alcohol over about 80% purity. Because any water
      present will seperate out in the presence of the gasoline (and become a
      problem), you either need to exclusively use the alcohol, or dry it right
      out (eg 99%+ purity) if using it to mix with gasoline. See Steve Spences
      site for more details, the Mother Earth Alcohol Fuel manual, or the The
      Manual for the Home and Farm Production of Alcohol Fuel. In addition, in
      the USA, you can get a "small fuel producer" permit, which allows small
      scale distilling for "motor fuel" purposes. A nice advantage is that they
      don't require denaturing for "fuel" used on the premises. The regulations
      are posted at http://www.webconx.com/ethanolusaregs.htm

      15) How do I convert between gallons and litres and ....

      To convert between SI & Imperial units, multiply the first unit by the
      conversion factor to get the second. Divide back to do it in reverse .eg 1L
      = 0.264 US gal, so 20 L = 20 x 0.264 = 5.28 US gal, and 20 US gal / 0.264 =
      75.76 L

      1 L = 0.264 US gal = 0.221 UK gal
      1 L = 1.057 US qt = 0.880 UK qt
      1 kg = 2.204 lbm = 32.15 oz (troy) = 35.27 oz (av)
      deg F = ((9/5) x deg C )+ 32
      1m = 1000 mm = 39.37 inch = 3.28 ft = 1.09 yd

      16) What is a "Thumper" ?

      A "thumper" is an extra chamber sometimes fitted to a pot still. It can be
      as simple as a glass jar with two holes in the lid. The off-take from the
      still is fed into it, with the pipe running almost all the way to the
      bottom of the jar; the jar is half filled with liquid (water or mash or
      tails) so that the vapour from the still will bubble up through it; then
      the vapour coming off it is collected & cooled as per normal. It acts as a
      second distilling chamber using just the heat from the vapour, and lifts
      the purity from 50-60% to 70-80%, hence improving what might otherwise be a
      very mediocre design.

      17) Can I use a Reflux Still to make Rum or Whisky ?

      Yes you can. To do so, you need to carefully monitor the various
      transitions between the foreshots, heads, middle run, and tails, and time
      the collection of the middle run precisely. The reflux still allows you to
      more precisely judge the changes between the various stages, and hence
      target them accurately. A typical rum or whisky would be obtained by
      discarding the foreshots, then collecting the heads, middle run, and then
      begin the tails, until the purity has dropped to around 58-60% (81.4C). By
      altering when to start collecting, and how late to time the final "cut",
      various flavour profiles will result.
      ------------------------------------------------------------------------
      --------

      http://homedistiller.org This page last modified 03/04/2002 20:40:14
      email: ackland@...
    • Show all 29 messages in this topic