Loading ...
Sorry, an error occurred while loading the content.

[ai-geostats] Re: Unusual Ordinary Kriging Results

Expand Messages
  • Isobel Clark
    David You seem to have two problems: (1) the Vulcan answer does not match your hand calculation for the same weights and values. (2) you have negative weights.
    Message 1 of 1 , Oct 4, 2005
    • 0 Attachment
      David
       
      You seem to have two problems:
       
      (1) the Vulcan answer does not match your hand calculation for the same weights and values.
       
      (2) you have negative weights.
       
      I would think that (1) was of far more concern than two simply because it suggests that the software is not performing the correct calculations. If this block is wrong how about all the rest of them? Maybe you could try a few reasonable looking blocks and see if you can reproduce those answers. If not, Vulcan and all users need to know that the software has a bug! 
       
      It is possible you have something like 'affine transformation' or recoverability factor switched on. Does Vulcan do stuff like that? This would produce results outside the range of the data and not equal to weight times grade calculation.
       
      On (2), opinions differ about negative weights. With your well behaved data and very small negative weights you are unlikely to get values substantially outside the range of the samples. Witness your own calculation. If negative weights worry you, reduce your search radius until the negative weights become negligible.
       
      Does this help?
      Isobel
      http://www.kriging.com

      "Reid, David W" <David.W.Reid@...> wrote:
      Hello,
       
      After running ordinary kriging estimations using Vulcan mine planning software it was noticed there were some unusual estimated grades. I was hoping that someone can confirm that I on the right path + not heading up the yellow brick road to Oz.
       
      The estimated value reported/calculated by Vulcan for one block was 80.77.  I thought this unusual as the grade of the 16 samples selected for the estimation range from 51.2 to 65.9 (mean 59.6).   I calculated the estimated grade by summing the products of sample grade and sample weight (given by the software) and got a value of 60.13 which seems far more reasonable.
       
      Maptek the software vendor's response was to suggest that negative weights were responsible for the high estimation.
       
      Details of the samples are below.
       
      Have I overlooked something in my calculation or is there some other explanation for the result?
       
      Regards
       
      David Reid
       
      NumberXYZGradeDistanceweightweight * grade
      151325.619954.3205.28648.7550.31681120.27589
      251325.619954.3206.86412.7510.0475553.043512
      35131019953.7206.9565.915.6990.0970726.397071
      451308.219968.6206.5851.219.1830.0785374.021086
      551309.419970.1206.6763.919.5570.058283.724066
      651325.319939205.0858.219.9480.084324.907436
      75131019939.3204.7855.121.1970.1173516.466049
      851325.319977.5204.9856.721.2670.18251110.34838
      951310.319938.7204.886021.6460.0859065.154343
      1051325.319939206.658.221.843-0.03607-2.09928
      115131019939.3206.355.40522.767-0.00408-0.22581
      1251325.319977.5206.556.722.980.0281311.59505
      1351310.319938.7206.46023.259-0.02124-1.27434
      1451309.419970.1208.962.324.395-0.0517-3.22108
      1551340.219939205.486128.1720.0408172.489816
      1651340.2199392076129.772-0.0242-1.4764
      TOTAL160.12579
      Ave59.60031block estimate 80.77
       
       
       

      David Reid

      This message and any attached files may contain information that is confidential and/or subject of legal privilege intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error and that any dissemination, copying or use of this message or attachment is strictly forbidden, as is the disclosure of the information therein. If you have received this message in error please notify the sender immediately and delete the message.
      * By using the ai-geostats mailing list you agree to follow its rules
      ( see http://www.ai-geostats.org/help_ai-geostats.htm )

      * To unsubscribe to ai-geostats, send the following in the subject or in the body (plain text format) of an email message to sympa@...

      Signoff ai-geostats
    Your message has been successfully submitted and would be delivered to recipients shortly.