Re: [multimachine] Re: Jeremmy in Kenya has a problem
- Sometimes you have to use what is to hand.But agreed a simple standard drum would be too thin, so in that case you could fill it with concrete and fix a metal shaft through the center?This would give the weight needed, an axle through the center, if metal is in short supply it need only go some of the way through and even if the outer metal skin starts to break and wear it shouldn't matter to much.John Kiely (IRL)From: Pat Delany <rigmatch@...>
To: "firstname.lastname@example.org" <email@example.com>
Sent: Sunday, December 2, 2012 10:06 PM
Subject: Re: [multimachine] Re: Jeremmy in Kenya has a problemHave to find out for sure, but I think Jeremmy was told to build a roller from a drum. Really too thin material in my mind.From: Wes Jones <wes@...>
Sent: Sunday, December 2, 2012 2:55 PM
Subject: Re: [multimachine] Re: Jeremmy in Kenya has a problem
- Had not heard from Jeremmy in a few days, turns out that his malaria kicked in again and he was back in hospital. He was able to borrow a visitor's laptop to let me know.When he gets out, I'm going to wire him $30 to buy aluminum scrap. He has been trying to collect aluminum for months but has only come up with a stack of clutch disks from a tractor. Can't imagine what kind of an alloy it would be.Pat
From: David G. LeVine <dlevine@...>
Sent: Monday, April 15, 2013 6:15 PM
Subject: Re: [multimachine] Jeremmy in Kenya has a problem
On 04/12/2013 10:17 PM, Shannon DeWolfe wrote:
His concrete is drying and he is now looking ahead for a solution tothe chuck back plate problem.
Dumb idea: How about a manhole cover for a really big faceplate? Good flat cast iron...
"Among the many misdeeds of British rule in India, history will look upon the Act of depriving a whole nation of arms as the blackest."
Mohandus Ghandi, An Autobiography, Page 446.