Re: [multimachine] Re: parallel pipe gauge, will this work?
- Hi,how about clear flexable plastic pipe,cheap and can be any length you want.Mikeafloat
From: David G. LeVine <dlevine@...>
Sent: Sat, 4 December, 2010 19:16:29
Subject: Re: [multimachine] Re: parallel pipe gauge, will this work?
On 12/04/2010 10:32 AM, Pat wrote:
> The precision level (or any level) is what I want to avoid. I should have said earlier that one of the objects of the device is to replace a precision level that is unaffordable? to many including me.
How about a glass partially filled with water, can you afford that? I
think I can afford that, even on Social Security.
We have a sister site for files and pictures dedicated to concrete machine framed machine tools. You will find a great deal of information about concrete based machines and the inventor of the concrete frame lathe, Lucian Ingraham Yeomans. Go to http://groups.yahoo.com/group/Multimachine-Concrete-Machine-Tools/
Also visit the Joseph V. Romig group for even more concrete tool construction, shop notes, stories, and wisdom from the early 20th Century.
-------------Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
- I know its OT, but if you have a windows computer go to command prompt, and entertelnet towel.blinkenlights.nlfor some amazing ASCII art
On Tue, Dec 7, 2010 at 1:14 PM, Pat <rigmatch@...> wrote:
The Yeomans secret? was to cast all holes oversize, let the base season, align the stuff and lock it in place with a non shrinking filler.
--- In email@example.com, keith gutshall <drpshops@...> wrote:
> Hello Bill
> Â Look at the design IÂ thought ofÂ ,Â I was thinking with a concrete base
> Â you can take it apart to getÂ it out.Ifyou bolted it together, it can be adjusted> Â With the bolts to act a jacking bolts, the bolts would adjust the ways level.
> to the size machine you have easier.
> Â You just turn the bolts to get the machine level.
> Â With a concete base there is no way to cast the holes Â accurate enought to work.
> The hole will have to be cast Â oversize
> Â Am I wrong in looking at the problem?
> Â Keith> --- On Tue, 12/7/10, oldstudentmsgt <wmrmeyers@...> wrote:
> Deep Run Portage
> Back Shop
> " The Lizard Works"
> From: oldstudentmsgt <wmrmeyers@...>> Â
> Subject: [multimachine] Re: parallel pipe gauge, will this work?
> To: firstname.lastname@example.org
> Date: Tuesday, December 7, 2010, 11:54 AM
>> > >characters are created using the Alt key in combination withÃƒâ€š number(s).>
> Pat, there is a pdf in files of "Parallel ways guage" that I just uploaded. Make 2, or make one and cut it in half lengthwise. If you drilled a centered hole in each of the notches, you could use that to guide a drill for fastening the ways to the bed.
> Hope this helps! Leonardo I am NOT! ;)
> Bill in OKC
> --- In email@example.com, Pat Delany <rigmatch@> wrote:
> > For a very old man, could you just do a "paint" drawing? This problem is driving
> > me nuts!
> > pat
> > ________________________________
> > From: oldstudentmsgt <wmrmeyers@>
> > To: firstname.lastname@example.org
> > Sent: Mon, December 6, 2010 11:04:03 AM
> > Subject: [multimachine] Re: parallel pipe gauge, will this work?
> > QWERTY & Dvorak are arrangments of characters on a keyboard, and have nothing at
> > all to do with the encoding to produce characters. There were at one time
> > several different methods of encoding characters, most of them proprietary. I
> > beleive they have standardized on ASCII, and they're into something like the
> > 30th generation of revisions. It used to be a 8-bit encoding that gave 256
> > possible characters, inclusding some that were non-printing, like carriage
> > returns and shift and un-shift. Some keyboards can do multiple encodings, some
> > only one. Newer chips and increased memory and encoding schemes can take input
> > from one kind of keyboard and change it to any other, as well.
> > It can be a lot of fun, but it's not metalworking...
> > http://www.asciimation.co.nz/
> > http://www.calormen.com/Star_Trek/ASCII/
> > Something very like the one my dad has is about halfway down this page:
> > http://chris.com/ascii/index.php?art=people/naked ladies
> > Could be NSFW, depending on how strict your workplace is.
> > Bill in OKC
> > --- In email@example.com, HB <scfpigs@> wrote:
> > >
> > > If the all the characters used to create the art are plainly in the QWERTY
> > >keyboard it's not necessarily ASCII art although ASCII can also reproduce all
> > >characters in the QWERTY keyboard to create the art.
> > > ASCII arts as originally started are those artworks created using characters in
> > >ASCII that are not readily reflected in the QWERTY keyboard. Special ASCII
> > >
> > > Examples of special characters not shown in the QWERTY keyboard: ÃƒÆ'Ã‚Â¦, ÃƒÆ'Ã¢â‚¬Â , ÃƒÂ¢Ã¢â‚¬"",
> > >ÃƒÆ'Ã‚Â¼, ÃƒÆ'Ã‚Â¡, ÃƒÆ'Ã‚Â§,Ãƒâ€š Ãƒâ€šÃ‚Â½,Ãƒâ€š ÃƒÂ¢Ã¢â‚¬Â¢Ã…Â¸, ÃƒÂ¢"Ã…", ÃƒÂ¢"Ã‚Â´Ãƒâ€š> > >> > > Ãƒâ€š
> > > --- On Sat, 12/4/10, DennisF MacIntyre <a1g2r3i@> wrote:
> > >
> > >
> > > From: DennisF MacIntyre <a1g2r3i@>
> > > Subject: [multimachine] Re: parallel pipe gauge, will this work?
> > > To: firstname.lastname@example.org
> > > Date: Saturday, December 4, 2010, 7:20 AM
> > >
> > >
> > >
> > >
> > >
> > > Dear Bill in OKC
> > > Ãƒâ€š Ãƒâ€š Ãƒâ€š Ãƒâ€š ASCII ART WARNING!> > > Not to be argumentative - Just why is it ASCII art and not QWERTY art.Ãƒâ€š Just
> > > __________________
> > > II___I I___II
> > > I____________________________I
> > >> > > curious?
> > >
> > > keep smiling
> > >
> > > dennis mac
> > >