Loading ...
Sorry, an error occurred while loading the content.

17657Re: [multimachine] RE: New machine badly needed

Expand Messages
  • louis richardson
    Aug 31, 2013
    • 0 Attachment
      another alternative is to use 2 pieces of pipe,one (the smaller)must be turned or filled so it is a slip fit or a light press fit into larger pipe,which is first drilled with 16-20 1/2 inch holes, evenly spaced the length,
      of larger pipe,and every 90 degrees, so that after smaller pipe is pressed into larger pipe, the smaller pipe can be welded to larger pipe by way of 1/2 inch holes, resulting in a very thick and solid pipe.oil drilling pipe is thick ,any of that in africa?????? i am sure any oil field pipe that is bent wll not be sent back over seas from where it came. 
      From: louis richardson <louisrfnauto@...>
      To: "multimachine@yahoogroups.com" <multimachine@yahoogroups.com>
      Sent: Saturday, August 31, 2013 2:39 PM
      Subject: Re: [multimachine] RE: New machine badly needed
       
      flling pipe with molten metal to add mass or weight just wont work, added material always comes loose from vibration, only molten steel added to steel will work, an alternative is to bolt or weld weigth to pipe
      .good luck.
      From: Chris Tofu <rampaginggreenhulk@...>
      To: multimachine@yahoogroups.com
      Sent: Saturday, August 31, 2013 11:07 AM
      Subject: Re: [multimachine] RE: New machine badly needed
       
      What about filling the pipe with some sort of molten metal, even aluminum? If it shrank (hopefully) you could remove it, apply an adhesive and reinsert it.
    • Show all 49 messages in this topic