Loading ...
Sorry, an error occurred while loading the content.

16908Re: [multimachine] overhead belting for milling spindle

Expand Messages
  • David G. LeVine
    Mar 21, 2013
    • 0 Attachment
      From: Pierre Coueffin <pcoueffin@...>
      Sent: Wednesday, March 20, 2013 10:07 AM
      To: multimachine@yahoogroups.com
      Subject: Re: [multimachine] overhead belting for milling spindle

       

      Sherline uses a toothed belt running in a pulley that has no teeth.  I've never had any problem with the belt slipping or stalling during normal lathe or milling operations with this setup.  They do not invert the belt, since the belt has sloped sides, and the pulley has a matching slope.  In practice, it is like a V-belt, but the teeth allow it to wrap around a smaller diameter pulley.


      However that is not a flat belt, it is a cogged V belt, similar to the AX, BX, CX, etc. series.

      Dave  8{)

      --


      "Among the many misdeeds of British rule in India, history will look upon the Act of depriving a whole nation of arms as the blackest."

      Mohandus Ghandi, An Autobiography, Page 446.
    • Show all 8 messages in this topic