Loading ...
Sorry, an error occurred while loading the content.

Re: Skipped Tests (was: handler help)

Expand Messages
  • Perrin Harkins
    ... No, you should be fine. However, I have also simply installed a new perl on top of the one shipped by RH with no problems. (I did this because I wanted
    Message 1 of 18 , Aug 1, 2003
    • 0 Attachment
      On Fri, 2003-08-01 at 16:24, Tofu Optimist wrote:
      > Am I going to have problems following the MP 2.0
      > install instructions
      >
      > http://perl.apache.org/docs/2.0/user/install/install.html
      >
      > if I don't nuke the current perl first?

      No, you should be fine. However, I have also simply installed a new
      perl on top of the one shipped by RH with no problems. (I did this
      because I wanted to use 5.6.1 rather than 5.8.0.) You will be blowing
      the RPM system by doing that, so it's not an advisable way to handle a
      large cluster of machines, but it works fine if you just need to get a
      quick dev environment bootstrapped.

      - Perrin
    • Tofu Optimist
      Ack!! My perl build failed. Here s what I did.... .... nuke the RPMS [root@SAM root]# rpm -e mod_ssl [root@SAM root]# rpm -e mod_python [root@SAM root]# rpm
      Message 2 of 18 , Aug 1, 2003
      • 0 Attachment
        Ack!! My perl build failed.

        Here's what I did....

        .... nuke the RPMS
        [root@SAM root]# rpm -e mod_ssl
        [root@SAM root]# rpm -e mod_python
        [root@SAM root]# rpm -e pho
        [root@SAM root]# rpm -e php-ldap
        [root@SAM root]# rpm -e php-imap
        [root@SAM root]# rpm -e php
        [root@SAM root]# rpm -e redhat-config-httpd
        [root@SAM root]# rpm -e webalizer
        [root@SAM root]# rpm -e httpd
        [root@SAM root]# rpm -e mod_perl

        ....download perl, apache, mod_perl

        ls
        -rw-rw-r-- 1 aprk aprk 6260081 Jul 7
        11:09 httpd-2.0.47.tar.gz
        -rw-rw-r-- 1 aprk aprk 918029 Apr 27
        22:53 mod_perl-2.0-current.tar.gz
        -rw------- 1 aprk aprk 4145152 Aug 1
        16:48 perl-5.8.0.tar.gz

        ....unzip and untar them, then

        cd perl-5.8.0
        ./Configure -des
        make && make test

        Here's the failure

        Failed Test Stat Wstat Total
        Fail Failed List of Failed
        -------------------------------------------------------------------------------
        ../lib/Locale/Codes/t/all.t 20
        2 10.00% 9-10
        ../lib/Locale/Codes/t/languages.t 59
        1 1.69% 22
        42 tests and 406 subtests skipped.
        Failed 2/712 test scripts, 99.72% okay. 3/68552
        subtests failed, 100.00% okay.


        Oh helpful gurus, any advice?

        With gratitude --

        A

        __________________________________
        Do you Yahoo!?
        Yahoo! SiteBuilder - Free, easy-to-use web site design software
        http://sitebuilder.yahoo.com
      • Perrin Harkins
        ... [...] ... You didn t follow my earlier advice about changing the locale, did you? I wasn t kidding about that. You can t build perl 5.8.0 successfully on
        Message 3 of 18 , Aug 1, 2003
        • 0 Attachment
          On Fri, 2003-08-01 at 17:46, Tofu Optimist wrote:
          > Ack!! My perl build failed.
          [...]
          > Failed Test Stat Wstat Total
          > Fail Failed List of Failed
          > -------------------------------------------------------------------------------
          > ../lib/Locale/Codes/t/all.t 20
          > 2 10.00% 9-10
          > ../lib/Locale/Codes/t/languages.t 59
          > 1 1.69% 22
          > 42 tests and 406 subtests skipped.
          > Failed 2/712 test scripts, 99.72% okay. 3/68552
          > subtests failed, 100.00% okay.

          You didn't follow my earlier advice about changing the locale, did you?
          I wasn't kidding about that. You can't build perl 5.8.0 successfully on
          a RH 9 system unless you change the locale.

          Note that 5.8.1 does not have this problem and is about to be released.

          - Perrin
        • Tofu Optimist
          I m not TRYING to be difficult; I am clueless. ... Exactly HOW do I change the locale? And after I do that, I do my make && make install again, yes? Many
          Message 4 of 18 , Aug 1, 2003
          • 0 Attachment
            I'm not TRYING to be difficult; I am clueless.
            :)

            Exactly HOW do I change the locale?

            And after I do that, I do my

            make && make install

            again, yes?

            Many thanks!
            :)

            A


            __________________________________
            Do you Yahoo!?
            Yahoo! SiteBuilder - Free, easy-to-use web site design software
            http://sitebuilder.yahoo.com
          • Tofu Optimist
            I am still here, trying to build mod_perl 2. Many thanks to everyone who offered help. To recap: I freshly installed RedHat 9 on a box, then used RPM to remove
            Message 5 of 18 , Aug 1, 2003
            • 0 Attachment
              I am still here, trying to build mod_perl 2.
              Many thanks to everyone who offered help.

              To recap: I freshly installed RedHat 9 on a box,
              then used RPM to remove modules involving httpd.
              (See notes below). Then I built perl 5.8.0 from
              source, first doing a "export LANG=C" to address
              the UTF bug. The perl build worked. I did everything
              as non-root until the make install, which I did as
              root.

              I then built Apache 2.0.47 from source.
              Seemed to go OK (there was no make test step...)
              I did everything as non-root until the make install,
              which I did as root.

              Then as root I used CPAN to install
              Bundle::WWW, LWP, and HTML::Parser.
              Had some troubles, used the force option, and plowed
              ahead. (Maybe I should have stopped here at the first

              sign of trouble....)

              As non-root, did
              cd mod_perl-1.99_09/
              perl Makefile.PL MP_AP_PREFIX=$HOME/httpd/prefork
              MP_INST_APACHE2=1
              make

              which went fine.

              make tests did not work -- below is the bottom of the
              output.

              Argh!

              Suggestions?

              - A

              PS Below the make test output below, I included a
              note file where I've been pasting commands I've run...
              in some places, it contains notes, rather than exact
              linux commands.

              ==================================
              = BOTTOM OF FAILED make test
              ==================================

              <snip>
              /usr/bin/perl -Iblib/arch/Apache2 -Iblib/lib/Apache2 \
              t/TEST -clean
              *** setting ulimit to allow core files
              ulimit -c unlimited; t/TEST -clean
              APACHE_USER= APACHE_GROUP= APACHE_PORT= APACHE= APXS=
              \
              /usr/bin/perl -Iblib/arch/Apache2 -Iblib/lib/Apache2 \
              t/TEST -verbose=0
              *** setting ulimit to allow core files
              ulimit -c unlimited; t/TEST -verbose=0
              /home/aprk/httpd/prefork/bin/httpd -d
              /home/aprk/src/mod_perl-1.99_09/t -f
              /home/aprk/src/mod_perl-1.99_09/t/conf/httpd.conf
              -DAPACHE2
              using Apache/2.0.47 (prefork MPM)

              waiting for server to start: ..[Fri Aug 01 22:34:36
              2003] [info] 19 Apache:: modules loaded
              [Fri Aug 01 22:34:36 2003] [info] 3 APR:: modules
              loaded
              [Fri Aug 01 22:34:36 2003] [info] base server + 8
              vhosts ready to run tests
              ..
              waiting for server to start: ok (waited 2 secs)
              server SAM:8529 started
              server SAM:8530 listening (TestProtocol::echo_filter)
              server SAM:8531 listening (TestProtocol::echo)
              server SAM:8532 listening (TestPreConnection::note)
              server SAM:8533 listening (TestFilter::in_str_msg)
              server SAM:8534 listening
              (TestFilter__both_str_con_add)
              server SAM:8535 listening (TestFilter::in_bbs_msg)
              server SAM:8536 listening (TestDirective::perlmodule)
              server SAM:8537 listening (TestDirective::perlrequire)
              server SAM:8538 listening
              (TestDirective::perlloadmodule4)
              server SAM:8539 listening
              (TestDirective::perlloadmodule5)
              server SAM:8540 listening
              (TestDirective::perlloadmodule3)
              server SAM:8541 listening
              (TestDirective::perlloadmodule6)
              apache/add_config..............ok
              apache/cgihandler..............ok
              apache/conftree................ok
              apache/constants...............ok
              apache/post....................ok
              apache/read....................ok
              apache/scanhdrs................ok
              apache/scanhdrs2...............ok
              apache/send_cgi_header.........ok
              apache/subprocess..............ok
              apache/write...................ok
              api/access.....................ok
              api/aplog......................ok
              api/conn_rec...................ok
              api/lookup_uri.................ok
              api/lookup_uri2................ok
              api/module.....................ok
              api/r_subclass.................ok
              api/request_rec................ok
              api/response...................ok
              api/rutil......................ok
              api/sendfile...................ok
              api/server_rec.................ok
              api/server_util................ok
              api/uri........................ok
              apr/base64.....................ok
              apr/constants..................ok
              apr/date.......................ok
              apr/netlib.....................ok
              apr/os.........................ok
              apr/pool.......................ok
              apr/socket.....................ok
              apr/string.....................ok
              apr/table......................ok
              apr/threadmutex................skipped
              all skipped: Perl was not built with
              'ithreads' enabled
              apr/util.......................ok
              apr/uuid.......................ok
              compat/apache..................ok
              compat/apache_file.............ok
              compat/apache_table............ok
              compat/apache_uri..............ok
              compat/apache_util.............ok
              compat/conn_authen.............ok
              compat/request.................ok
              compat/request_body............ok
              compat/send_fd.................ok
              directive/env..................ok
              directive/perl.................ok
              directive/perldo...............ok
              directive/perlloadmodule.......ok
              directive/perlloadmodule2......ok
              directive/perlloadmodule3......ok
              directive/perlloadmodule4......ok
              directive/perlloadmodule5......ok
              directive/perlloadmodule6......ok
              directive/perlmodule...........ok
              directive/perlrequire..........ok
              directive/pod..................ok
              directive/setupenv.............ok
              error/api......................ok
              error/runtime..................ok
              error/syntax...................ok
              filter/both_str_con_add........ok
              filter/both_str_req_add........ok
              filter/in_bbs_body.............ok
              filter/in_bbs_msg..............ok
              filter/in_init_basic...........ok
              filter/in_str_consume..........ok
              filter/in_str_declined.........ok
              filter/in_str_lc...............ok
              filter/in_str_msg..............ok
              filter/in_str_sandwich.........ok
              filter/out_bbs_basic...........ok
              filter/out_bbs_ctx.............ok
              filter/out_init_basic..........ok
              filter/out_str_api.............ok
              filter/out_str_ctx.............ok
              filter/out_str_declined........ok
              filter/out_str_lc..............ok
              filter/out_str_remove..........ok
              filter/out_str_req_eos.........ok
              filter/out_str_reverse.........ok
              hooks/access...................ok
              hooks/authen...................ok
              hooks/authz....................ok
              hooks/cleanup..................ok
              hooks/fixup....................ok
              hooks/headerparser.............ok
              hooks/init.....................ok
              hooks/push_handlers............ok
              hooks/stacked_handlers.........ok
              hooks/trans....................ok
              modperl/current_callback.......ok
              modperl/dir_config.............ok
              modperl/endav..................ok
              modperl/env....................ok
              modperl/exit...................ok
              modperl/getc...................ok
              modperl/method.................ok
              modperl/methodname.............ok
              modperl/methodobj..............ok
              modperl/perl...................ok
              modperl/pnotes.................ok
              modperl/print..................ok
              modperl/printf.................ok
              modperl/readline...............ok
              modperl/request_rec_tie_api....ok
              modperl/sameinterp.............ok
              modperl/setauth................ok
              modperl/subenv.................ok
              modperl/taint..................ok
              modules/cgi....................ok
              modules/cgiupload..............ok
              modules/include................ok
              modules/include2...............ok
              preconnection/note.............ok
              protocol/echo..................ok
              protocol/echo_filter...........ok
              All tests successful, 1 test skipped.
              Files=118, Tests=621, 134 wallclock secs (117.14 cusr
              + 10.72 csys = 127.86 CPU)
              *** server SAM:8529 shutdown
              cd ModPerl-Registry && make test
              make[1]: Entering directory
              `/home/aprk/src/mod_perl-1.99_09/ModPerl-Registry'
              /usr/bin/perl -I../blib/arch/Apache2
              -I../blib/lib/Apache2 \
              t/TEST -clean
              *** setting ulimit to allow core files
              ulimit -c unlimited; t/TEST -clean
              APACHE_USER= APACHE_GROUP= APACHE_PORT= APACHE= APXS=
              \
              /usr/bin/perl -I../blib/arch/Apache2
              -I../blib/lib/Apache2 \
              t/TEST -verbose=0
              *** setting ulimit to allow core files
              ulimit -c unlimited; t/TEST -verbose=0
              /home/aprk/httpd/prefork/bin/httpd -d
              /home/aprk/src/mod_perl-1.99_09/ModPerl-Registry/t -f
              /home/aprk/src/mod_perl-1.99_09/ModPerl-Registry/t/conf/httpd.conf
              -DAPACHE2
              using Apache/2.0.47 (prefork MPM)

              waiting for server to start: ....
              waiting for server to start: ok (waited 3 secs)
              server SAM:8529 started
              206................ok
              404................ok
              500................ok
              bad_scripts........ok
              basic..............ok
              cgi................NOK 2# Failed test 2 in cgi.t at
              line 19
              cgi................FAILED test 2
              Failed 1/2 tests, 50.00% okay
              closure............ok
              perlrun_require....ok
              redirect...........ok
              special_blocks.....ok
              Failed Test Stat Wstat Total Fail Failed List of
              Failed
              -------------------------------------------------------------------------------
              cgi.t 2 1 50.00% 2
              *** server SAM:8529 shutdown
              !!! error running tests (please examine
              t/logs/error_log)
              make[1]: *** [run_tests] Error 1
              make[1]: Leaving directory
              `/home/aprk/src/mod_perl-1.99_09/ModPerl-Registry'
              make: *** [run_tests] Error 2
              aprk@SAM:~/src/mod_perl-1.99_09>
              aprk@SAM:~/src/mod_perl-1.99_09>
              aprk@SAM:~/src/mod_perl-1.99_09>


              ==================================
              = MISC NOTES FROM INSTALL
              ==================================

              Note file where I've been pasting commands I've run...
              in some places, it contains notes, rather than exact
              linux commands, in other places, exact commands, or
              copypaste from the terminal...




              su
              updatedb
              [root@SAM root]# rpm -e mod_ssl
              [root@SAM root]# rpm -e mod_python
              [root@SAM root]# rpm -e pho
              [root@SAM root]# rpm -e php-ldap
              [root@SAM root]# rpm -e php-imap
              [root@SAM root]# rpm -e php
              [root@SAM root]# rpm -e redhat-config-httpd
              [root@SAM root]# rpm -e webalizer
              [root@SAM root]# rpm -e httpd
              [root@SAM root]# rpm -e mod_perl
              .....download perl, apache, mod_perl
              -rw-rw-r-- 1 aprk aprk 6260081 Jul 7
              11:09 httpd-2.0.47.tar.gz
              -rw-rw-r-- 1 aprk aprk 918029 Apr 27
              22:53 mod_perl-2.0-current.tar.gz
              -rw------- 1 aprk aprk 4145152 Aug 1
              16:48 perl-5.8.0.tar.gz
              ........unzip and untar them
              cd perl-5.8.0
              ./Configure -des
              .......fix the UTF bug
              export LANG=C (from
              http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=87682)
              make && make test
              su
              cd ....perl-5.8.0
              make install
              exit
              cd .......httpd
              ./configure --prefix=$HOME/httpd/prefork
              --with-mpm=prefork
              make
              su
              make install
              exit
              cd mod_perl-1.99_09/
              perl Makefile.PL MP_AP_PREFIX=$HOME/httpd/prefork
              MP_INST_APACHE2=1
              make
              su
              perl -MCPAN -eshell
              force install HTML::Parser
              force install LWP
              force install WWW::Bundle (?not sure?)
              exit
              make test



              __________________________________
              Do you Yahoo!?
              Yahoo! SiteBuilder - Free, easy-to-use web site design software
              http://sitebuilder.yahoo.com
            • Ged Haywood
              Hi there, ... http://twiki.org/cgi-bin/view/Codev/UsingPerl58OnRedHat8 about half a dozen messages down. See also
              Message 6 of 18 , Aug 1, 2003
              • 0 Attachment
                Hi there,

                On Fri, 1 Aug 2003, Tofu Optimist wrote:

                > Exactly HOW do I change the locale?

                http://twiki.org/cgi-bin/view/Codev/UsingPerl58OnRedHat8

                about half a dozen messages down. See also

                http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=87682

                > make && make install
                >
                > again, yes?

                Better start with

                % cd /home/directory/src

                (or whatever your home directory is) and then

                % rm -rf apache_1.3.28
                % rm -rf mod_perl-1.28
                % tar xzvf apache_1.3.28.tgz
                % tar xzvf mod_perl-1.28
                % perl Makefile.PL ....

                and I would suggest that in future instead of

                % make && make install

                that you do these steps as separate commands

                % make
                % make test
                % su
                Password:
                # make install
                # exit
                %

                which will give you the opportunity to abandon ship at any point
                before the install. Finally if you do

                % script

                before you start the 'perl Makefile.PL' step then everything you see
                on the screen will be logged to a file so you can peruse it later if
                you feel the need. It will help you to become familiar with build the
                process. It looks a lot more complicated than it is. Really.

                % man script

                for more details. I'd use 'less -S' to look at the scriptfile.
                In fact I always alias 'less -S' to 'li' in my login scripts... :)

                73,
                Ged.
              • Ged Haywood
                Hello again, ... why not LANG=en_US ? ... Oooohhh. Don t do that... We re getting out of my area of experience here, I don t use mod_perl2, but I hear there
                Message 7 of 18 , Aug 1, 2003
                • 0 Attachment
                  Hello again,

                  On Fri, 1 Aug 2003, Tofu Optimist wrote:

                  > To recap: I freshly installed RedHat 9 on a box,
                  > then used RPM to remove modules involving httpd.
                  > (See notes below). Then I built perl 5.8.0 from
                  > source, first doing a "export LANG=C"

                  why not

                  LANG=en_US

                  ?

                  > Then as root I used CPAN to install
                  > Bundle::WWW, LWP, and HTML::Parser.
                  > Had some troubles, used the force option,

                  Oooohhh. Don't do that...

                  We're getting out of my area of experience here, I don't use mod_perl2,
                  but I hear there are recent changes to CGI.pm. Did you install the
                  latest CGI.pm? You should.

                  73,
                  Ged.
                • Tofu Optimist
                  Hi folks. It is Saturday evening, 2 Aug 03, 9pm local time, and I just got my modperl 2 and apache 2 running on my dev box, built from source, and just ran my
                  Message 8 of 18 , Aug 2, 2003
                  • 0 Attachment
                    Hi folks. It is Saturday evening, 2 Aug 03, 9pm local
                    time, and I just got my modperl 2 and apache 2 running
                    on my dev box, built from source, and just ran my
                    first handler successfully. Hurrah!!

                    I started on this wild adventure last Wednesday
                    evening, so it took me around 3.5 days, working on and
                    off. Thanks to the good folks on this list for
                    helping me out, especially ged & perrin for their
                    patience and insightful posts.

                    I wanted to summarize what I learned, in case it
                    helps someone else trying to do the same thing.

                    CAUTION: I am a linux and apache and mod-perl NEWBIE;
                    please don�t take the following as gospel, I could be
                    (and likely am) wrong. But hopefully my points below
                    will at least raise helpful issues. At times I had
                    trouble as my knowledge was so rudimentary I couldn't
                    read between the lines in the docs and in the posts.
                    (For example, why do the docs casually say "make &&
                    make test && make install", when in fact you have to
                    su over to root before the install step? <g>)

                    So here are my notes on this process:

                    * START CLEAN. Before starting, get rid of any and
                    all old perls and apaches on the system. I had
                    several instances of both due my installation
                    fumblings -- I opted to reinstall Red Hat 9 to start
                    fresh. If you do this, make sure you ask RH to
                    install all the programming tools � on my first
                    reinstall, I opted for the �server� configuration,
                    which didn�t give me all the compiling tools needed,
                    and so had to reinstall it again. Useful tools are
                    updatedb and locate, and rpm �e. Took me a while to
                    realize I could use wget to pull down .tar.gz sources
                    via http; not knowing about wget, I was trying to get
                    everything through ftp and that was a drag.

                    * SEARCH IS YOUR FRIEND. I really liked the interface
                    and search function at
                    http://www.gossamer-threads.com/archive/mod_perl_C1/.
                    Amazing resource. And searching for key terms or
                    error messages on Google (main) and Google groups
                    gives a good a sense of what might be going on.

                    * MOD_PERL 2 IS STILL YOUNG. I didn�t realize going
                    into this that at this point (2 Aug 03) Mod Perl 2 is
                    still pre-release. Ack! My ISP runs Apache 2 so
                    decided to install mod-perl 2, so I wanted AP2 and MP2
                    on my dev machine to match my ISP setup. (Funny � he
                    got MP2 running in a few hours, vs. my 3.5 days � but
                    then again, this was also my introduction to linux,
                    apache, etc.)

                    * DON�T DO EVERYTHING AS ROOT. Build and test all
                    packages as non-root, then su to root to make install.
                    Don�t make and make test as root. I did and ran into
                    troubles and had to start again.

                    * IF PERL DOESN�T PASS 100% OF ITS TESTS, STOP. Build
                    perl 5.8.x first, and make sure it passes every test.
                    Do not continue, do not pass go, do not collect $200
                    until all the tests run. I had to use EXPORT
                    LANG=en_us to get around the UTF bug in Perl 5.8.0.

                    * CPAN IS YOUR FRIEND. After building a successful
                    perl 5.8.0, I used CPAN to install (in this order)
                    CGI, LWP, Bundle::LWP, HTML::Parser. Now, I didn�t
                    get 100% clean installs on the last two, and (in
                    violation of the previous rule above) continued on
                    with my fingers crossed.

                    * DON�T MIX APACHE 1 AND APACHE 2 DOCS. Without
                    realizing it, I was bouncing between the docs at the
                    mod_perl site for 1.0 and 2.0. I didn�t realize how
                    different the two packages are. Stay in one world or
                    the other. The apache install went easily, following
                    the instructions online and in Stas� excellent book,
                    practical mod_perl.

                    * ONE ERROR. The mod_perl install went smoothly too,
                    following the instructions online. I did get one
                    error i: �filter/in_bbs_msg..............server side
                    has failed (response code: 404),see t/logs/error_log
                    for more details� but again I foolishly forged on
                    ignoring it. Will this come back to haunt me? I hope
                    not. Anyone want to tell me what this means?

                    * DON�T MIX MODPERL1 AND MODPERL2 DOCS. I read Stas�
                    book, Practical mod_perl, and really found it useful
                    and well-written. But I thought the whole book was
                    about �mod-perl� � technically it isn�t. Most of the
                    book is about MP1, and Chaps 24 and 25 are about MP2.
                    My handlers were wrong, my httpd.conf was wrong � I
                    was trying to run MP1 stuff on MP2. I made the same
                    mistake reading ModPerl Developer�s Cookbook. The
                    fault was mine � MP 1 and MP 2 are quite different. I
                    just didn�t know this going into this process.

                    * READ PRACTICAL MODPERL CHAP 23 �GETTING HELP AND
                    ONLINE RESOURCES� FIRST. I noticed this chapter late
                    in the game. Read it first.

                    Those are my tidbits of advice. Good luck to you if
                    you are a newcomer, and thanks to the veterans for
                    providing all this great information, advice, and
                    encouragement --

                    A




                    __________________________________
                    Do you Yahoo!?
                    Yahoo! SiteBuilder - Free, easy-to-use web site design software
                    http://sitebuilder.yahoo.com
                  • Ron Savage
                    ... mod_perl2, ... For the record, the last CGI.pm which I could get to work under Win2K/IE 6 is 2.97. V 2.99 corrupts the string returned by $q - url() by
                    Message 9 of 18 , Aug 3, 2003
                    • 0 Attachment
                      >We're getting out of my area of experience here, I don't use
                      mod_perl2,
                      >but I hear there are recent changes to CGI.pm. Did you install the
                      >latest CGI.pm? You should.
                      >
                      >73,
                      >Ged.

                      For the record, the last CGI.pm which I could get to work under
                      Win2K/IE 6 is 2.97.

                      V 2.99 corrupts the string returned by $q -> url() by %-etc encoding
                      /-etc characters.
                      --
                      Ron Savage, rons@... on 04/08/2003. Room EF 312
                      Deakin University, 221 Burwood Highway, Burwood, VIC 3125, Australia
                      Phone: +61-3-9251 7067, Fax: +61-3-9251 7604
                      http://www.deakin.edu.au/~rons
                    • Perrin Harkins
                      ... FYI, this was probably also because of the locale issue. Best to make it a global change so you won t have to set it every time you want to run (or
                      Message 10 of 18 , Aug 4, 2003
                      • 0 Attachment
                        On Fri, 2003-08-01 at 22:53, Tofu Optimist wrote:
                        > Then as root I used CPAN to install
                        > Bundle::WWW, LWP, and HTML::Parser.
                        > Had some troubles, used the force option, and plowed
                        > ahead. (Maybe I should have stopped here at the first

                        FYI, this was probably also because of the locale issue. Best to make
                        it a global change so you won't have to set it every time you want to
                        run (or install) perl stuff.

                        - Perrin
                      Your message has been successfully submitted and would be delivered to recipients shortly.