Loading ...
Sorry, an error occurred while loading the content.

Re: Motor Mod/Remodeling :)

Expand Messages
  • jakerage001
    I m Already a member but they don t seem to be all that into modifying like im discussing ... and ... and a ... mini ... http://docs.yahoo.com/info/terms/
    Message 1 of 4 , Dec 2, 2003
    • 0 Attachment
      I'm Already a member but they don't seem to be all that into
      modifying like im discussing

      --- In mlathemods@yahoogroups.com, "GuyW" <guyiii@c...> wrote:
      > Jake, you might like the UNIMAT group
      >
      > UNIMAT@yahoogroups.com
      >
      > -Guy-
      >
      >
      > ----- Original Message -----
      > From: "jakerage001" <jakerage001@y...>
      > To: <mlathemods@yahoogroups.com>
      > Sent: Tuesday, December 02, 2003 4:11 PM
      > Subject: [mlathemods] Motor Mod/Remodeling :)
      >
      >
      > > Hi im new around here but I recently acquired an old unimat db200
      and
      > > I was wondering about putting on a NEW motor and a variable speed
      > > controller, here's the reason, the motor has an 80% duty cycle
      and a
      > > replacement with one of the later model u-90's is gonna end up
      > > costing me almost as much as i paid for the whole machine, kinda
      > > silly huh. So... I was thinking with all these new little electric
      > > robotics motors why can't one be outfitted as the new motor on a
      mini
      > > lathe/mill, and while your there add a little variable speed
      > > controller so you dont have to reposition the belts every time you
      > > change what your doing. If anyone has played with this idea on any
      > > Mini lathe please tell me what you did or how it went, any
      > > information would certainly be appreciated
      > >
      > > Thanks in advance,
      > > Jake
      > >
      > >
      > >
      > >
      > > To unsubscribe from this group, send an email to:
      > > mlathemods-unsubscribe@yahoogroups.com
      > >
      > >
      > >
      > > Your use of Yahoo! Groups is subject to
      http://docs.yahoo.com/info/terms/
      > >
      > >
      > >
    • GuyW
      Jake, you might like the UNIMAT group UNIMAT@yahoogroups.com -Guy- ... From: jakerage001 To: Sent:
      Message 2 of 4 , Dec 2, 2003
      • 0 Attachment
        Jake, you might like the UNIMAT group

        UNIMAT@yahoogroups.com

        -Guy-


        ----- Original Message -----
        From: "jakerage001" <jakerage001@...>
        To: <mlathemods@yahoogroups.com>
        Sent: Tuesday, December 02, 2003 4:11 PM
        Subject: [mlathemods] Motor Mod/Remodeling :)


        > Hi im new around here but I recently acquired an old unimat db200 and
        > I was wondering about putting on a NEW motor and a variable speed
        > controller, here's the reason, the motor has an 80% duty cycle and a
        > replacement with one of the later model u-90's is gonna end up
        > costing me almost as much as i paid for the whole machine, kinda
        > silly huh. So... I was thinking with all these new little electric
        > robotics motors why can't one be outfitted as the new motor on a mini
        > lathe/mill, and while your there add a little variable speed
        > controller so you dont have to reposition the belts every time you
        > change what your doing. If anyone has played with this idea on any
        > Mini lathe please tell me what you did or how it went, any
        > information would certainly be appreciated
        >
        > Thanks in advance,
        > Jake
        >
        >
        >
        >
        > To unsubscribe from this group, send an email to:
        > mlathemods-unsubscribe@yahoogroups.com
        >
        >
        >
        > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.