Loading ...
Sorry, an error occurred while loading the content.

Re: [mill_drill] Oile or grease?

Expand Messages
  • Corey Renner
    Grease. c Blog: http://coreyrenner.tumblr.com/ YouTube Channel: http://www.youtube.com/user/vandal968
    Message 1 of 5 , Sep 14 1:18 AM
    • 0 Attachment
      Grease.

      c



      On Fri, Sep 13, 2013 at 1:34 PM, <d.seiter@...> wrote:
       

      I thought you weren't supposed to use any lube on scrolls; maybe that's just in some situations?

      -Dave


      From: gmiller4396@...
      To: "mill drill" <mill_drill@yahoogroups.com>
      Sent: Friday, September 13, 2013 8:38:00 AM
      Subject: [mill_drill] Oile or grease?



      I acquired an old 5" Union 3-jaw chuck, and after disassembling it and soaking it in Evaporust, mainly to clean it up real nice, no rust of any kind, I now need to put it back together.

       

      Any recommendations on whether to oil the scroll, or lightly use some kind of grease on it? 

       

      Thanks.

      Mark




    • gmiller4396
      It looked like old caked grease residue was in the chuck when I used brake cleaner and lacquer thinner on the parts, and I didn t know if I had to worry about
      Message 2 of 5 , Sep 14 4:26 AM
      • 0 Attachment

        It looked like old caked grease residue was in the chuck when I used brake cleaner and lacquer thinner on the parts, and I didn't know if I had to worry about grease catching chips. The easiest way I've found to do research is to just ask here and get to the point.

         

        Thanks.

        Mark



        --- In mill_drill@yahoogroups.com, <mill_drill@yahoogroups.com> wrote:

        Grease.

        c



        On Fri, Sep 13, 2013 at 1:34 PM, <d.seiter@...> wrote:
         

        I thought you weren't supposed to use any lube on scrolls; maybe that's just in some situations?

        -Dave

        From: gmiller4396@...
        To: "mill drill" <mill_drill@yahoogroups.com>
        Sent: Friday, September 13, 2013 8:38:00 AM
        Subject: [mill_drill] Oile or grease?



        I acquired an old 5" Union 3-jaw chuck, and after disassembling it and soaking it in Evaporust, mainly to clean it up real nice, no rust of any kind, I now need to put it back together.

         

        Any recommendations on whether to oil the scroll, or lightly use some kind of grease on it? 

         

        Thanks.

        Mark




      Your message has been successfully submitted and would be delivered to recipients shortly.