Loading ...
Sorry, an error occurred while loading the content.
 

Re: [mill_drill] rotary table size?

Expand Messages
  • Guenther Paul
    Dana I would not buy a turn table smaller ten 6 . I would buy a horizontal with 90 degree i also would get a chuck that mounts to the table. Try this link
    Message 1 of 15 , Apr 16, 2013
      Dana
      I would not buy a turn table smaller ten 6" . I would buy a horizontal with 90 degree i also would get a chuck that mounts to the table. Try this link
      http://cdcotools.com/item.php?itemid=157 

      http://cdcotools.com/item.php?itemid=159

       

      GP




      From: Dana Hague <d-m-hague@...>
      To: mill_drill@yahoogroups.com
      Sent: Tue, April 16, 2013 9:23:13 PM
      Subject: [mill_drill] rotary table size?

       

      I'm figuring I need a rotary table for various projects, but I can't spend
      a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
      4" imports with horizontal/vertical mounting on ebay, or I can get an
      unknown brand used 6" one with only horizontal mounting for a comparable
      price. How useful/accurate are the tiny imported ones?

    • greg.gelhar
      The problem I see with the small 3 or 4 inch units is the lack of clamping space. My parts, on average, would cover any of the t-slots. Might I suggest the
      Message 2 of 15 , Apr 17, 2013
        The problem I see with the small 3 or 4 inch units is the lack of clamping
        space. My parts, on average, would cover any of the t-slots. Might I
        suggest the Grizzly model H7527. It is a 6 inch H/V model that comes with
        dividing plates, tailstock, and a hold down clamps. I also bought a 4inch,
        4 jaw chuck for mine. It opens up a whole list of additional operations I
        can perform.

        Greg G.
        Osseo, MN



        > I'm figuring I need a rotary table for various projects, but I can't spend
        > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
        > 4" imports with horizontal/vertical mounting on ebay, or I can get an
        > unknown brand used 6" one with only horizontal mounting for a comparable
        > price. How useful/accurate are the tiny imported ones?
        >
        >
      • Druid Noibn
        Hi,   Look at a 6 or possibly an 8 table.  Consider the size of the projects and the size of your mill/drill.    There are sales, free shipping and deals
        Message 3 of 15 , Apr 17, 2013
          Hi,
           
          Look at a 6" or possibly an 8" table.  Consider the size of the projects and the size of your mill/drill. 
           
          There are sales, free shipping and deals on eBay.
           
          Be well,
          DBN   

          --- On Tue, 4/16/13, Dana Hague <d-m-hague@...> wrote:

          From: Dana Hague <d-m-hague@...>
          Subject: [mill_drill] rotary table size?
          To: mill_drill@yahoogroups.com
          Date: Tuesday, April 16, 2013, 9:23 PM

           
          I'm figuring I need a rotary table for various projects, but I can't spend
          a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
          4" imports with horizontal/vertical mounting on ebay, or I can get an
          unknown brand used 6" one with only horizontal mounting for a comparable
          price. How useful/accurate are the tiny imported ones?

        • Paul
          I would recommend the Grizzly model H7527 also. I seems like a good unit and is complete with everything you should need. I bought mine when they had it on
          Message 4 of 15 , Apr 17, 2013
            I would recommend the Grizzly model H7527 also. I seems like a good unit and is complete with everything you should need. I bought mine when they had it on sale. Be careful with Items from CDCO, I've had a number of problems with his products. Either good or bad, but difficult to get the bad items rectified.

            Paul H.
            Kalamazoo

            --- In mill_drill@yahoogroups.com, greg@... wrote:
            >
            > The problem I see with the small 3 or 4 inch units is the lack of clamping
            > space. My parts, on average, would cover any of the t-slots. Might I
            > suggest the Grizzly model H7527. It is a 6 inch H/V model that comes with
            > dividing plates, tailstock, and a hold down clamps. I also bought a 4inch,
            > 4 jaw chuck for mine. It opens up a whole list of additional operations I
            > can perform.
            >
            > Greg G.
            > Osseo, MN
            >
            >
            >
            > > I'm figuring I need a rotary table for various projects, but I can't spend
            > > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
            > > 4" imports with horizontal/vertical mounting on ebay, or I can get an
            > > unknown brand used 6" one with only horizontal mounting for a comparable
            > > price. How useful/accurate are the tiny imported ones?
            > >
            > >
            >
          • Corey Renner
            +1 I got a bad rotary table from CDCO. It took almost 6months to get a refund (never use Paypal when it can be avoided) and I was stuck paying shipping both
            Message 5 of 15 , Apr 17, 2013
              +1
              I got a bad rotary table from CDCO.  It took almost 6months to get a refund (never use Paypal when it can be avoided) and I was stuck paying shipping both ways which was around $80.  The input shaft was bent by .050 so the table would bind severely on each rotation.  Once I eventually got my partial refund "Frank" told me "Nothing wrong with table, I sold to other customer."  I have no doubt that he did.  Beware.

              cheers,
              c


              On Wed, Apr 17, 2013 at 7:47 AM, Paul <phowell_7@...> wrote:
               

              I would recommend the Grizzly model H7527 also. I seems like a good unit and is complete with everything you should need. I bought mine when they had it on sale. Be careful with Items from CDCO, I've had a number of problems with his products. Either good or bad, but difficult to get the bad items rectified.

              Paul H.
              Kalamazoo

              --- In mill_drill@yahoogroups.com, greg@... wrote:
              >
              > The problem I see with the small 3 or 4 inch units is the lack of clamping
              > space. My parts, on average, would cover any of the t-slots. Might I
              > suggest the Grizzly model H7527. It is a 6 inch H/V model that comes with
              > dividing plates, tailstock, and a hold down clamps. I also bought a 4inch,
              > 4 jaw chuck for mine. It opens up a whole list of additional operations I
              > can perform.
              >
              > Greg G.
              > Osseo, MN
              >
              >
              >
              > > I'm figuring I need a rotary table for various projects, but I can't spend
              > > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
              > > 4" imports with horizontal/vertical mounting on ebay, or I can get an
              > > unknown brand used 6" one with only horizontal mounting for a comparable
              > > price. How useful/accurate are the tiny imported ones?
              > >
              > >
              >


            • Guenther Paul
              My friend in Florida buys from them all the time with no problem. Just remember where the cheap tolls sold come from  GP ________________________________
              Message 6 of 15 , Apr 17, 2013
                My friend in Florida buys from them all the time with no problem. Just remember where the cheap tolls sold come from
                 
                GP



                From: Corey Renner <vandal968@...>
                To: mill_drill@yahoogroups.com
                Sent: Wed, April 17, 2013 11:10:55 AM
                Subject: Re: [mill_drill] Re: rotary table size?

                 

                +1
                I got a bad rotary table from CDCO.  It took almost 6months to get a refund (never use Paypal when it can be avoided) and I was stuck paying shipping both ways which was around $80.  The input shaft was bent by .050 so the table would bind severely on each rotation.  Once I eventually got my partial refund "Frank" told me "Nothing wrong with table, I sold to other customer."  I have no doubt that he did.  Beware.

                cheers,
                c


                On Wed, Apr 17, 2013 at 7:47 AM, Paul <phowell_7@...> wrote:
                 

                I would recommend the Grizzly model H7527 also. I seems like a good unit and is complete with everything you should need. I bought mine when they had it on sale. Be careful with Items from CDCO, I've had a number of problems with his products. Either good or bad, but difficult to get the bad items rectified.

                Paul H.
                Kalamazoo

                --- In mill_drill@yahoogroups.com, greg@... wrote:
                >
                > The problem I see with the small 3 or 4 inch units is the lack of clamping
                > space. My parts, on average, would cover any of the t-slots. Might I
                > suggest the Grizzly model H7527. It is a 6 inch H/V model that comes with
                > dividing plates, tailstock, and a hold down clamps. I also bought a 4inch,
                > 4 jaw chuck for mine. It opens up a whole list of additional operations I
                > can perform.
                >
                > Greg G.
                > Osseo, MN
                >
                >
                >
                > > I'm figuring I need a rotary table for various projects, but I can't spend
                > > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
                > > 4" imports with horizontal/vertical mounting on ebay, or I can get an
                > > unknown brand used 6" one with only horizontal mounting for a comparable
                > > price. How useful/accurate are the tiny imported ones?
                > >
                > >
                >


              • Guenther Paul
                Here is a e-bay seller that told me he will pay the shipping back if you don t like it or if there is some default
                Message 7 of 15 , Apr 17, 2013
                  Here is a e-bay seller that told me he will pay the shipping back if you don't like it or if there is some default
                  GP



                  From: Corey Renner <vandal968@...>
                  To: mill_drill@yahoogroups.com
                  Sent: Wed, April 17, 2013 11:10:55 AM
                  Subject: Re: [mill_drill] Re: rotary table size?

                   

                  +1
                  I got a bad rotary table from CDCO.  It took almost 6months to get a refund (never use Paypal when it can be avoided) and I was stuck paying shipping both ways which was around $80.  The input shaft was bent by .050 so the table would bind severely on each rotation.  Once I eventually got my partial refund "Frank" told me "Nothing wrong with table, I sold to other customer."  I have no doubt that he did.  Beware.

                  cheers,
                  c


                  On Wed, Apr 17, 2013 at 7:47 AM, Paul <phowell_7@...> wrote:
                   

                  I would recommend the Grizzly model H7527 also. I seems like a good unit and is complete with everything you should need. I bought mine when they had it on sale. Be careful with Items from CDCO, I've had a number of problems with his products. Either good or bad, but difficult to get the bad items rectified.

                  Paul H.
                  Kalamazoo

                  --- In mill_drill@yahoogroups.com, greg@... wrote:
                  >
                  > The problem I see with the small 3 or 4 inch units is the lack of clamping
                  > space. My parts, on average, would cover any of the t-slots. Might I
                  > suggest the Grizzly model H7527. It is a 6 inch H/V model that comes with
                  > dividing plates, tailstock, and a hold down clamps. I also bought a 4inch,
                  > 4 jaw chuck for mine. It opens up a whole list of additional operations I
                  > can perform.
                  >
                  > Greg G.
                  > Osseo, MN
                  >
                  >
                  >
                  > > I'm figuring I need a rotary table for various projects, but I can't spend
                  > > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
                  > > 4" imports with horizontal/vertical mounting on ebay, or I can get an
                  > > unknown brand used 6" one with only horizontal mounting for a comparable
                  > > price. How useful/accurate are the tiny imported ones?
                  > >
                  > >
                  >


                • rogers92026
                  Having a rotary table can be invaluable for some operations. But a poor man s alternative (especially if you are milling something soft like aluminum) might be
                  Message 8 of 15 , Apr 18, 2013
                    Having a rotary table can be invaluable for some operations.

                    But a poor man's alternative (especially if you are milling something soft like aluminum) might be a manual (no gears) type of home-built rotary table. The table is rotated with a handle sticking out. I recall seeing one on Youtube. I recall that the guy put pins in the table to make it easy to mill to common angles like 15, 30, 45, 60, 75 and 90 degrees, etc. Here is the Youtube link to the Chuck Fellows video (he did a nice job): http://www.youtube.com/watch?v=am5774rnjtU

                    His rotary table won't do some things, but it will actually do a few things well and faster than a typical screw drive table...


                    --- In mill_drill@yahoogroups.com, Dana Hague <d-m-hague@...> wrote:
                    >
                    > I'm figuring I need a rotary table for various projects, but I can't spend
                    > a lot... this is for a Jet mill/drill. I see lots of cheap (<$100) 3" and
                    > 4" imports with horizontal/vertical mounting on ebay, or I can get an
                    > unknown brand used 6" one with only horizontal mounting for a comparable
                    > price. How useful/accurate are the tiny imported ones?
                    >
                  • miker557
                    My only advise is to stay away from the Harbor Freight 6 rotary table. I bought one years ago for my Rockwell, and ended up sending it back. First - it s made
                    Message 9 of 15 , Apr 18, 2013
                      My only advise is to stay away from the Harbor Freight 6" rotary table. I bought one years ago for my Rockwell, and ended up sending it back. First - it's made in India, and while that by itself isn't necessarily bad, the unit looked like it was finished by hand using a bastard file - even the graduation marks looked like they were hand-scribed (not even straight). Second - size. While the table was 6" in diameter, the base was well over 8" across. It was HUGE, and just barely fit on the 6x26 table of my Rockwell. Third - weight. The base of the unit was thick cast iron, and the entire unit weighed in at over 50 pounds! I dunno about you, but I don't have a crane handy to lift the thing on and off my table ....

                      As I said, I sent it back, and took the hit on the restocking fee. I then bought a Chinese-made 6" unit that had a 6" base, and weighed 20-something pounds less - not to mention that it looked like it could make precise cuts (as opposed to the HF unit, which didn't).


                      Miker
                    • Guenther Paul
                      Miker You gotta eat more wheat s to lift your attachments. I do  GP ________________________________ From: miker557 To:
                      Message 10 of 15 , Apr 18, 2013
                        Miker
                        You gotta eat more wheat's to lift your attachments. I do
                         
                        GP



                        From: miker557 <mikaelc@...>
                        To: mill_drill@yahoogroups.com
                        Sent: Thu, April 18, 2013 7:15:52 PM
                        Subject: [mill_drill] Re: rotary table size?

                         



                        My only advise is to stay away from the Harbor Freight 6" rotary table. I bought one years ago for my Rockwell, and ended up sending it back. First - it's made in India, and while that by itself isn't necessarily bad, the unit looked like it was finished by hand using a bastard file - even the graduation marks looked like they were hand-scribed (not even straight). Second - size. While the table was 6" in diameter, the base was well over 8" across. It was HUGE, and just barely fit on the 6x26 table of my Rockwell. Third - weight. The base of the unit was thick cast iron, and the entire unit weighed in at over 50 pounds! I dunno about you, but I don't have a crane handy to lift the thing on and off my table ....

                        As I said, I sent it back, and took the hit on the restocking fee. I then bought a Chinese-made 6" unit that had a 6" base, and weighed 20-something pounds less - not to mention that it looked like it could make precise cuts (as opposed to the HF unit, which didn't).

                        Miker

                        Miker
                      • cuttysark71
                        Dana, I have a 6 Phase II table. It is a well made product, but came damaged. The handle on the handwheel was bent pretty badly. I got the table from Enco,
                        Message 11 of 15 , Apr 19, 2013
                          Dana,

                          I have a 6" Phase II table. It is a well made product, but came damaged. The handle on the handwheel was bent pretty badly. I got the table from Enco, and a phone call was all it took to get it resolved. They wanted me to return the table but I didn't want to pay shipping for such a minor thing. They offered me a price adjustment which I took and then just drilled out the hole in the wheel for the next size imperial thread (3/8-16) and tapped to accept a handle from my collection of parts. I wish now that I had gone with at least an 8" diameter table. Think about the size of parts you will be making and don't go any smaller than you MIGHT need. I've had to do some creative fixturing to hold 8" and larger parts.
                        • svsequoia_pdx
                          Dana: I have an 8 Phase II and I am glad I got one at least that big. (I have an RF 45 clone mill/drill.) Attaching a chuck or collet holder to a smaller one
                          Message 12 of 15 , Apr 19, 2013
                            Dana:

                            I have an 8" Phase II and I am glad I got one at least that big. (I have an RF 45 clone mill/drill.) Attaching a chuck or collet holder to a smaller one can be a pain. Also consider that the center hole has a Morse taper and whether or not you have MT tooling holders for that size.

                            The Phase II operates smoothly and appears well-designed except for the hand wheel, which is plastic molded over a keyed steel insert. Their website pictures show a metal wheel but it wasn't available. I actually got my table on sale because the plastic wheel had broken in shipping to the distributor. (I was planning on gluing it back together and moving the handle to a different location, but they didn't send the broken bits and the handle, so I just bought a new wheel from Phase II and turned a brass handle for it.) One of the virtues of Phase II is that they have parts for their Chinese imports!

                            Most experienced machinists also recommend getting a horizontal/vertical table.
                            Craig
                          • Guenther Paul
                            Cutty Sark Hey just want to tell you i used to drink that poison now i cant hardly find it in stores. That s ok don t need it  GP
                            Message 13 of 15 , Apr 19, 2013
                              Cutty Sark
                              Hey just want to tell you i used to drink that poison now i cant hardly find it in stores. That's ok don't need it
                               
                              GP



                              From: cuttysark71 <cuttysark71@...>
                              To: mill_drill@yahoogroups.com
                              Sent: Fri, April 19, 2013 5:25:59 AM
                              Subject: [mill_drill] Re: rotary table size?

                               

                              Dana,

                              I have a 6" Phase II table. It is a well made product, but came damaged. The handle on the handwheel was bent pretty badly. I got the table from Enco, and a phone call was all it took to get it resolved. They wanted me to return the table but I didn't want to pay shipping for such a minor thing. They offered me a price adjustment which I took and then just drilled out the hole in the wheel for the next size imperial thread (3/8-16) and tapped to accept a handle from my collection of parts. I wish now that I had gone with at least an 8" diameter table. Think about the size of parts you will be making and don't go any smaller than you MIGHT need. I've had to do some creative fixturing to hold 8" and larger parts.

                            • Edgar
                              You could build your own rotary table. Here is the one that Mr. Ishimura made. He includes photos and drawings.
                              Message 14 of 15 , Apr 20, 2013
                                You could build your own rotary table. Here is the one that Mr. Ishimura made. He includes photos and drawings.

                                http://homepage3.nifty.com/amigos/index_table/indextable-e.htm

                                Be sure to look at all the tools he has made. His projects always show the highest workmanship.

                                Orlin in SC/USA
                              Your message has been successfully submitted and would be delivered to recipients shortly.