Re: [mill_drill] Re: Enco Rong Fu sale mill/drill
- LynnThere are good deals out your way. I fund a Bridgeport in south Carolina for $700.00 but the shipping was more so didn't bid, that was on e-bay should have gotten it myself. There is one in New York now cheap. I am in SW MichiganGP
From: Lynn Kasdorf <kasdorfmisc@...>
Sent: Wed, March 27, 2013 3:18:06 PM
Subject: Re: [mill_drill] Re: Enco Rong Fu sale mill/drill
On 3/27/2013 2:02 PM, Guenther Paul wrote:
> Where are you located
I am in Northern VA- but I am not in the market for a mill- I have 3
already! I was responding to the original poster who was considering
spending $3k on a tricked out mill drill. I'm just saying that I've seen
rebuilt bridgeports in that range of $$
- Well if you ever want to rent out your nephews, let me know. All I have is a 16 year old son, pretty dang smart but just getting into his growth...
--- In firstname.lastname@example.org, "largrin" <LarGrin@...> wrote:
> My mill drill had to be carried about 70 feet, then through two man doors to get it into
> my basement. I got a few real strong nephews. Not too bright, but strong.
> We took it apart on my trailer, they carried it in, then we reassembled it in place.
> Not an easy task, but doable.
> A friend saw it, and asked how we got it in there. I told him it is simple- I move all my heavy stuff with $20 bills.
> Another guy asked how I would ever get it out of there. I told him that, when the day comes, whoever my widow sells it to can worry about that.
> Larry in WV
> --- In email@example.com, David Van Mill <nomous69@> wrote:
> > I had made the decision to order the Rong Fu mill. I had credit card in hand and was about to make the call when I realized that the sale lasted through April. I decided to look a little longer and put off ordering until the last day of the sale. Well something came up on Craigs list and today I put money down on a Grizzly model G0729 which has the power feed table. It is located only about 20 minutes from my house. I should pick it up this weekend. It should be a challenge getting it loaded on a trailer or pickup and home into my garage. Does anyone know if these are easily broken down into slightly smaller parts?
> > Â
> > I am anxious to get it but not move it. The person that owns it showed me a hole in the vertical column and said the way it was moved itÂ was to put a steel bar through the hole and attach a sling and move it with an engine cherry picker. Has anyone done this? I am open for suggestions. Thanks for all the feedback on my original question. I hope I have made a good decision.
> > Â
> > David Van MillÂ / nomous69