Loading ...
Sorry, an error occurred while loading the content.

Re: Belt sizes for Jet JMD 18?

Expand Messages
  • csuslosky
    I will, its all apart now for paint, and I have to build a stand. I started this project while waiting for parts for another project so it may be a while lol.
    Message 1 of 11 , Jan 30, 2013
    View Source
    • 0 Attachment
      I will, its all apart now for paint, and I have to build a stand. I started this project while waiting for parts for another project so it may be a while lol.
      --- In mill_drill@yahoogroups.com, Bill wrote:
      >
      > You're welcome Craig,
      >
      >
      >
      > Good luck with your project, and have fun! Let us know how it turns
      > out..maybe a pic or two!
      >
      >
      >
      > Bill
      >
      >
      >
      > From: mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com] On
      > Behalf Of csuslosky
      > Sent: Wednesday, January 30, 2013 3:31 AM
      > To: mill_drill@yahoogroups.com
      > Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?
      >
      >
      >
      >
      >
      > Thank you, Ill give it a look to see, maybe thats why they changed them from
      > the book, or maybe the book is printed wrong, not a big deal. Thank you for
      > your help again.
      > Craig
      >
      > --- In mill_drill@yahoogroups.com ,
      > Bill wrote:
      > >
      > > There's some room for adjustment... its entirely possible either the
      > v-belt
      > > set listed in the book, or the set you removed will work.
      > >
      > >
      > >
      > > Comparing what is listed in the book, to what you have...note that the B33
      > > vs B34, and the B42, vs the B41. First one is an inch longer, and the
      > other
      > > is an inch shorter.
      > >
      > > Overall dim between the spindle pulley & the motor pulley will remain
      > about
      > > the same, but the idler position will change between the two belt
      > > configurations. You might do some playin' around and measuring..and see
      > > which set up is best. Wouldn't want to run out of idler travel after the
      > > belts stretch, which is very possible.
      > >
      > >
      > >
      > > Bill
      > >
      > >
      > >
      > > From: mill_drill@yahoogroups.com
      > [mailto:mill_drill@yahoogroups.com ]
      > On
      > > Behalf Of csuslosky
      > > Sent: Tuesday, January 29, 2013 6:41 PM
      > > To: mill_drill@yahoogroups.com
      > > Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?
      > >
      > >
      > >
      > >
      > >
      > >
      > > Thanks Bill! Now I just have to figure out why the book lists different
      > > numbers than my actual belt have on them. Im gonna check out the gates
      > site,
      > > Im from a small town and cant get them locally I dont believe. Thank you
      > > again for your help
      > > Craig
      > >
      > > --- In mill_drill@yahoogroups.com ,
      > > Bill wrote:
      > > >
      > > > Oh..while I'm on it...
      > > >
      > > > ...a good place to look for v-belts..is Gates...
      > > > http://www.gates.com/part_locator/index.cfm
      > > >
      > > > Kinda weird to navigate..but a lot of info there once you noodle it out.
      > > >
      > > >
      > > >
      > > > You can download the complete power transmission catalog in pdf here:
      > > > http://www.gates.com/catalogs/file_display.cfm?file=2012%20Catalog.pdf
      > > >
      > > Path=gates\catalogs&requesting=ptcatalog&location_id=2999>
      > > > &thisPath=gates\catalogs&requesting=ptcatalog&location_id=2999
      > > >
      > > > 12MB..
      > > >
      > > >
      > > >
      > > > Bill
      > > >
      > > >
      > > >
      > > > From: mill_drill@yahoogroups.com
      > > [mailto:mill_drill@yahoogroups.com
      > ]
      > > On
      > > > Behalf Of csuslosky
      > > > Sent: Tuesday, January 29, 2013 5:07 PM
      > > > To: mill_drill@yahoogroups.com
      > > > Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?
      > > >
      > > >
      > > >
      > > >
      > > >
      > > >
      > > > Dan
      > > > Thank you. My belt numbers are as follows, B34 and B41, is it as simple
      > as
      > > > crossing over to BX34 and BX 41? Thanks for your help everyone.
      > > > Craig
      > > >
      > > > --- In mill_drill@yahoogroups.com
      > ,
      > > > "Dan and Marlene Coleman" wrote:
      > > > >
      > > > > You are wanting BX belts. They are the cogged belts and transmit power
      > a
      > > > > little better on smaller pulleys.
      > > > >
      > > > >
      > > > >
      > > > > Dan Coleman
      > > > >
      > > > >
      > > > >
      > > > > From: mill_drill@yahoogroups.com
      >
      > > > [mailto:mill_drill@yahoogroups.com
      >
      > > ]
      > > > On
      > > > > Behalf Of csuslosky
      > > > > Sent: Monday, January 28, 2013 7:51 PM
      > > > > To: mill_drill@yahoogroups.com
      > > > > Subject: [mill_drill] Belt sizes for Jet JMD 18?
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > I have a Jet JMD-18 mill that Im cleaning up, I need the correct belt
      > > > sizes,
      > > > > lengths or numbers. I want to try the gates ones that are "cogged" on
      > > the
      > > > > inside, if thats the correct term. The local stores dont have these
      > > belts
      > > > so
      > > > > I will have to order them online. Eventually I will get the linked
      > > belts,
      > > > > but not now. Thanks for the help.
      > > > >
      > > >
      > > >
      > > >
      > > > _____
      > > >
      > > > No virus found in this message.
      > > > Checked by AVG - www.avg.com
      > > > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date:
      > 01/24/13
      > > >
      > >
      > >
      > >
      > > _____
      > >
      > > No virus found in this message.
      > > Checked by AVG - www.avg.com
      > > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
      > >
      >
      >
      >
      > _____
      >
      > No virus found in this message.
      > Checked by AVG - www.avg.com
      > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.