Loading ...
Sorry, an error occurred while loading the content.
 

FW: [mill_drill] Belt sizes for Jet JMD 18?

Expand Messages
  • Bill
    Oops..I meant to say 5L , not 5V ..like a 5L360, and a 5L450. They may be available in toothed. Bill From: Bill [mailto:bill_1955@hotmail.com] Sent: Monday,
    Message 1 of 3 , Jan 28, 2013

      Oops….I meant to say ‘5L’, not ‘5V’….like a 5L360, and a 5L450.

      They may be available in toothed.

       

      Bill

       

      From: Bill [mailto:bill_1955@...]
      Sent: Monday, January 28, 2013 6:17 PM
      To: 'mill_drill@yahoogroups.com'
      Subject: RE: [mill_drill] Belt sizes for Jet JMD 18?

       

      See page 22, item 88 & 89.

      http://www.misgroupinc.com/partfiles/M-350020.pdf

       

      A B33, and a B42. Do a bit of measuring and see if these look correct. Sometimes part numbers get translated incorrectly from Chinglish to English, or in this case, Taiwanese to English.

       

      B33: http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393

       

      B42: http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393

       

      They don’t list a toothed belt in those sizes, but you would be better served to go to a bearing house, rather than an auto parts store. Might be a different section, that is close to a ‘B’ that is available toothed. A ‘5V’ section….is a little narrower, but they may work.

      http://web.applied.com/site.cfm/Belts.cfm

       

      Bill

       

       

      From: mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com] On Behalf Of csuslosky
      Sent: Monday, January 28, 2013 5:51 PM
      To: mill_drill@yahoogroups.com
      Subject: [mill_drill] Belt sizes for Jet JMD 18?

       

       

      I have a Jet JMD-18 mill that Im cleaning up, I need the correct belt sizes, lengths or numbers. I want to try the gates ones that are "cogged" on the inside, if thats the correct term. The local stores dont have these belts so I will have to order them online. Eventually I will get the linked belts, but not now. Thanks for the help.


      No virus found in this message.
      Checked by AVG - www.avg.com
      Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13

    • Curt Wuollet
      I put the cog belts on my homier mill/drill and it really helped cold starting on the higher speeds. Good US belts make quite a difference in the vibration as
      Message 2 of 3 , Jan 28, 2013
        I put the cog belts on my homier mill/drill and it
        really helped cold starting on the higher speeds.
        Good US belts make quite a difference in the
        vibration as well.

        Regards

        cww

        Bill wrote:
        >
        > Oops….I meant to say ‘5L’, not ‘5V’….like a 5L360, and a 5L450.
        >
        > They may be available in toothed.
        >
        > Bill
        >
        > *From:* Bill [mailto:bill_1955@...]
        > *Sent:* Monday, January 28, 2013 6:17 PM
        > *To:* 'mill_drill@yahoogroups.com'
        > *Subject:* RE: [mill_drill] Belt sizes for Jet JMD 18?
        >
        > See page 22, item 88 & 89.
        >
        > http://www.misgroupinc.com/partfiles/M-350020.pdf
        >
        > A B33, and a B42. Do a bit of measuring and see if these look correct.
        > Sometimes part numbers get translated incorrectly from Chinglish to
        > English, or in this case, Taiwanese to English.
        >
        > B33:
        > http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393
        > <http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393>
        >
        > B42:
        > http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393
        > <http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393>
        >
        > They don’t list a toothed belt in those sizes, but you would be better
        > served to go to a bearing house, rather than an auto parts store.
        > Might be a different section, that is close to a ‘B’ that is available
        > toothed. A ‘5V’ section….is a little narrower, but they may work.
        >
        > http://web.applied.com/site.cfm/Belts.cfm
        >
        > Bill
        >
        > *From:* mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com]
        > *On Behalf Of *csuslosky
        > *Sent:* Monday, January 28, 2013 5:51 PM
        > *To:* mill_drill@yahoogroups.com
        > *Subject:* [mill_drill] Belt sizes for Jet JMD 18?
        >
        > I have a Jet JMD-18 mill that Im cleaning up, I need the correct belt
        > sizes, lengths or numbers. I want to try the gates ones that are
        > "cogged" on the inside, if thats the correct term. The local stores
        > dont have these belts so I will have to order them online. Eventually
        > I will get the linked belts, but not now. Thanks for the help.
        >
        > ------------------------------------------------------------------------
        >
        > No virus found in this message.
        > Checked by AVG - www.avg.com <http://www.avg.com>
        > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
        >
        >
      • csuslosky
        Thanks guys for the help! Im gonna try to measure the belts myself and see what I can come up with...
        Message 3 of 3 , Jan 29, 2013
          Thanks guys for the help! Im gonna try to measure the belts myself and see what I can come up with...





          --- In mill_drill@yahoogroups.com, Curt Wuollet wrote:
          >
          > I put the cog belts on my homier mill/drill and it
          > really helped cold starting on the higher speeds.
          > Good US belts make quite a difference in the
          > vibration as well.
          >
          > Regards
          >
          > cww
          >
          > Bill wrote:
          > >
          > > Oops….I meant to say `5L', not `5V'….like a 5L360, and a 5L450.
          > >
          > > They may be available in toothed.
          > >
          > > Bill
          > >
          > > *From:* Bill [mailto:bill_1955@...]
          > > *Sent:* Monday, January 28, 2013 6:17 PM
          > > *To:* 'mill_drill@yahoogroups.com'
          > > *Subject:* RE: [mill_drill] Belt sizes for Jet JMD 18?
          > >
          > > See page 22, item 88 & 89.
          > >
          > > http://www.misgroupinc.com/partfiles/M-350020.pdf
          > >
          > > A B33, and a B42. Do a bit of measuring and see if these look correct.
          > > Sometimes part numbers get translated incorrectly from Chinglish to
          > > English, or in this case, Taiwanese to English.
          > >
          > > B33:
          > > http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393
          > >
          > >
          > > B42:
          > > http://www.gatespowerpro.com/Comergent/en/US/adirect/gates?cmd=catSearchFrame&domProductQueryName=B33&returnURL=http://www.gatespowerpro.com/Comergent/en/US/adirect/gates&returnTarget=_top&gotoAdvSearch=false&CFID=73919888&CFTOKEN=93181393
          > >
          > >
          > > They don't list a toothed belt in those sizes, but you would be better
          > > served to go to a bearing house, rather than an auto parts store.
          > > Might be a different section, that is close to a `B' that is available
          > > toothed. A `5V' section….is a little narrower, but they may work.
          > >
          > > http://web.applied.com/site.cfm/Belts.cfm
          > >
          > > Bill
          > >
          > > *From:* mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com]
          > > *On Behalf Of *csuslosky
          > > *Sent:* Monday, January 28, 2013 5:51 PM
          > > *To:* mill_drill@yahoogroups.com
          > > *Subject:* [mill_drill] Belt sizes for Jet JMD 18?
          > >
          > > I have a Jet JMD-18 mill that Im cleaning up, I need the correct belt
          > > sizes, lengths or numbers. I want to try the gates ones that are
          > > "cogged" on the inside, if thats the correct term. The local stores
          > > dont have these belts so I will have to order them online. Eventually
          > > I will get the linked belts, but not now. Thanks for the help.
          > >
          > > ------------------------------------------------------------------------
          > >
          > > No virus found in this message.
          > > Checked by AVG - www.avg.com
          > > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
          > >
          > >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.