Loading ...
Sorry, an error occurred while loading the content.

Re: [mill_drill] Speeds for Spotting Drills

Expand Messages
  • Rick Sparber
    Corey, Cool idea! Gotta try it. Thanks, Rick Rick.Sparber.org
    Message 1 of 11 , Oct 5, 2011
    • 0 Attachment
      Corey,

      Cool idea! Gotta try it. 

      Thanks,

      Rick

      On Oct 5, 2011, at 12:34 PM, Corey Renner <vandal968@...> wrote:

      lay a  sheet of paper over the hole.  Allow the spot drill to tear thru it as it makes the hole.  Cures most chatter.

      cheers,
      c

      On Wed, Oct 5, 2011 at 9:30 AM, Paul Howell <phowell_7@...> wrote:
       

      Running a the same speed as a drill bit is what I thought was correct but spotting and countersinking at the same time is what I'm attempting. The spotting bit has two flutes (maybe not enough) it looks like Rick S. is using a technique where the speed is red
    • Rexarino
      Or a thin cotton rag, if the paper doesn t solve it. Rex
      Message 2 of 11 , Oct 5, 2011
      • 0 Attachment
        Or a thin cotton rag, if the paper doesn't solve it.

        Rex

        On Wed, Oct 5, 2011 at 9:34 AM, Corey Renner <vandal968@...> wrote:


        lay a  sheet of paper over the hole.  Allow the spot drill to tear thru it as it makes the hole.  Cures most chatter.

        cheers,
        c


      Your message has been successfully submitted and would be delivered to recipients shortly.