Loading ...
Sorry, an error occurred while loading the content.

Re: [mill_drill] Re: Leaky Head on my RF45 ????

Expand Messages
  • Curt Wuollet
    S/B odor sorry cww
    Message 1 of 45 , Jul 13, 2009
    • 0 Attachment
      S/B odor

      sorry
      cww

      Curt Wuollet wrote:
      > Or just coat the threads with good ol'
      > Permatex non-hardening. If you
      > get the right stuff, it has a peculiar
      > oder you will recognize the rest of
      > your life.
      >
      > Regards
      >
      > cww
      >
      > leasingham_connelly wrote:
      >
      >> It does not matter how good the quality of a screw or its mating hole are, the gap between the crest and root of the two parts will always be a spiral leak path. Two per screw and a very good capilliary tube. The only way to stop this type of leak is to use a thread sealant (or a specialist thread designed to have no gap - very costly!).
      >>
      >> Martin
      >>
      >> --- In mill_drill@yahoogroups.com, "Cliff. Johnston" <moments-in-time@...> wrote:
      >>
      >>
      >>> This is a point well taken. Many screws (bolts) are often sloppy fits and the source of oil leaks especially from Chinese manufacturers.. Even buying from a reputable dealer is no guarantee against this. It is a good idea to always check the fit of bolts (screws). I find myself surprised at how often there is a poor fit, and the solution is most often just a good U.S. made (or other reputable source) replacement part. More often than not the threaded hole is satisfactory, but the screws are outsourced and of variable quality.
      >>>
      >>> Cliff. Johnston
      >>> "May the best you've ever seen,
      >>> Be the worst you'll ever see;"
      >>> from A Scots Toast by Allan Ramsay
      >>> ----- Original Message -----
      >>> From: vakil01
      >>> To: mill_drill@yahoogroups.com
      >>> Sent: Friday, July 10, 2009 6:06 PM
      >>> Subject: [mill_drill] Re: Leaky Head on my RF45 ????
      >>>
      >>>
      >>>
      >>
      >>
      >> ------------------------------------
      >>
      >> Yahoo! Groups Links
      >>
      >>
      >>
      >>
      >>
      >>
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
    • Curt Wuollet
      S/B odor sorry cww
      Message 45 of 45 , Jul 13, 2009
      • 0 Attachment
        S/B odor

        sorry
        cww

        Curt Wuollet wrote:
        > Or just coat the threads with good ol'
        > Permatex non-hardening. If you
        > get the right stuff, it has a peculiar
        > oder you will recognize the rest of
        > your life.
        >
        > Regards
        >
        > cww
        >
        > leasingham_connelly wrote:
        >
        >> It does not matter how good the quality of a screw or its mating hole are, the gap between the crest and root of the two parts will always be a spiral leak path. Two per screw and a very good capilliary tube. The only way to stop this type of leak is to use a thread sealant (or a specialist thread designed to have no gap - very costly!).
        >>
        >> Martin
        >>
        >> --- In mill_drill@yahoogroups.com, "Cliff. Johnston" <moments-in-time@...> wrote:
        >>
        >>
        >>> This is a point well taken. Many screws (bolts) are often sloppy fits and the source of oil leaks especially from Chinese manufacturers.. Even buying from a reputable dealer is no guarantee against this. It is a good idea to always check the fit of bolts (screws). I find myself surprised at how often there is a poor fit, and the solution is most often just a good U.S. made (or other reputable source) replacement part. More often than not the threaded hole is satisfactory, but the screws are outsourced and of variable quality.
        >>>
        >>> Cliff. Johnston
        >>> "May the best you've ever seen,
        >>> Be the worst you'll ever see;"
        >>> from A Scots Toast by Allan Ramsay
        >>> ----- Original Message -----
        >>> From: vakil01
        >>> To: mill_drill@yahoogroups.com
        >>> Sent: Friday, July 10, 2009 6:06 PM
        >>> Subject: [mill_drill] Re: Leaky Head on my RF45 ????
        >>>
        >>>
        >>>
        >>
        >>
        >> ------------------------------------
        >>
        >> Yahoo! Groups Links
        >>
        >>
        >>
        >>
        >>
        >>
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.