Loading ...
Sorry, an error occurred while loading the content.

new article available: Minimizing Electronic Edge Finder Error

Expand Messages
  • rgsparber@aol.com
    If you use an Electronic Edge Finder to set zero, then you may be picking up avoidable Total Indicated Runout error from the spindle, collet, and EEF. This
    Message 1 of 3 , Apr 1, 2007
    • 0 Attachment
      If you use an Electronic Edge Finder to set zero, then you may be picking up avoidable Total Indicated Runout error from the spindle, collet, and EEF. This article presents a method for canceling this error.
       
      If you are interested, see
       
      <http://rick.sparber.org/Articles/ea/ea.pdf>
       
       
      Comments and corrections are welcome.
       
      Rick Sparber
      rgsparber@...
      web site: http://rick.sparber.org




      See what's free at AOL.com.
    • Philip Burman
      Hi Rick, Looks like a lot of effort. Use the edge finder twice, at 180 degree separaton and subtract half the difference, finished. Phil ... picking up ...
      Message 2 of 3 , Apr 2, 2007
      • 0 Attachment
        Hi Rick,

        Looks like a lot of effort. Use the edge finder twice, at 180 degree
        separaton and subtract half the difference, finished.

        Phil

        --- In mill_drill@yahoogroups.com, rgsparber@... wrote:
        >
        > If you use an Electronic Edge Finder to set zero, then you may be
        picking up
        > avoidable Total Indicated Runout error from the spindle, collet,
        and EEF.
        > This article presents a method for canceling this error.
        >
        > If you are interested, see
        >
        > <http://rick.sparber.org/Articles/ea/ea.pdf>
        >
        >
        > Comments and corrections are welcome.
        >
        > Rick Sparber
        > rgsparber@...
        > web site: http://rick.sparber.org
        >
        >
        >
        > ************************************** See what's free at
        http://www.aol.com
        >
      • leasingham_connelly
        ... picking up ... and EEF. ... Interesting article. Only one tiny point, you have much where it should be must after the comment about missing out the
        Message 3 of 3 , Apr 3, 2007
        • 0 Attachment
          --- In mill_drill@yahoogroups.com, rgsparber@... wrote:
          >
          > If you use an Electronic Edge Finder to set zero, then you may be
          picking up
          > avoidable Total Indicated Runout error from the spindle, collet,
          and EEF.
          > This article presents a method for canceling this error.
          >
          > If you are interested, see
          >
          > <http://rick.sparber.org/Articles/ea/ea.pdf>
          >
          >
          > Comments and corrections are welcome.
          >
          > Rick Sparber
          > rgsparber@...
          > web site: http://rick.sparber.org
          >

          Interesting article. Only one tiny point, you have "much" where it
          should be "must" after the comment about missing out the math and
          logic.

          Martin
        Your message has been successfully submitted and would be delivered to recipients shortly.