Loading ...
Sorry, an error occurred while loading the content.

Mill/Drilling 304 stainless

Expand Messages
  • steve huck
    Never cut on stainless before. Would HSS mills and drills be ok or do i need something Tin coated or maybe Cobalt? The final product will be polished to a
    Message 1 of 2 , Jul 2 7:44 AM
    • 0 Attachment
      Never cut on stainless before. Would HSS mills and drills be ok or do i need something Tin coated or maybe Cobalt?
       
      The final product will be polished to a mirror finish so the only concern is to get it to size and get the holes in it., dont care about finish.


      Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.
    • mertbaker
      Properly grund & honed HSS tooling will do the job nicely. Mert MertBaker@verizon.net ... From: steve huck To:
      Message 2 of 2 , Jul 2 9:10 AM
      • 0 Attachment
        Properly grund & honed HSS tooling will do the job nicely.
        Mert

        MertBaker@...
        ----- Original Message -----
        From: "steve huck" <stevehuckss396@...>
        To: <9x20Lathe@yahoogroups.com>; <machinistsprojects@yahoogroups.com>;
        <mill_drill@yahoogroups.com>
        Sent: Sunday, July 02, 2006 10:44 AM
        Subject: [mill_drill] Mill/Drilling 304 stainless


        > Never cut on stainless before. Would HSS mills and drills be ok or do i
        need something Tin coated or maybe Cobalt?
        >
        > The final product will be polished to a mirror finish so the only
        concern is to get it to size and get the holes in it., dont care about
        finish.
        >
        >
        > ---------------------------------
        > Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great
        rates starting at 1¢/min.
      Your message has been successfully submitted and would be delivered to recipients shortly.