Loading ...
Sorry, an error occurred while loading the content.

36106Re: [MILL_DRILL] Enco cutting fluid

Expand Messages
  • Bill Armstrong
    Jul 10, 2014
      What I am saying.....is they don't sell Enco #1 as concentrate.

      Sent from my iPad

      > On Jul 10, 2014, at 5:29 PM, "Stan Stocker skstocker@... [MILL_DRILL]" <MILL_DRILL@yahoogroups.com> wrote:
      >
      > What I'm saying is they have already diluted the concentrate they also
      > sell. Most of the machining fluids are diluted somewhere between 1:10
      > and 1:32. Usually ends up at $4 or less per gallon depending on
      > dilution and cost of the concentrate. If you like the stuff, buy the
      > concentrate and save lots of money.
      >
      > Sort of like buying already diluted auto antifreeze at $10/gallon, or
      > full strength at $13 (and diluting it yourself, making 2 gallons and
      > saving some money).
      >
      > Stan
      >
      > On 07/10/2014 04:53 PM, Bill Armstrong bill_1955@...
      > [MILL_DRILL] wrote:
      >>
      >>
      >> Dilute as specified means not diluting.
      >>
      >> On the bottle: "To be applied directly to application, do not dilute"
      >>
      >> Bill
      >>
      >> ------------------------------------------------------------------------
      >> To: MILL_DRILL@yahoogroups.com
      >> From: MILL_DRILL@yahoogroups.com
      >> Date: Thu, 10 Jul 2014 16:43:14 -0400
      >> Subject: Re: [MILL_DRILL] Enco cutting fluid
      >>
      >> Hi Folks,
      >>
      >> Sounds rather like pre-diluted soluble oil / flood coolant sort of
      >> stuff. In this case it sure does look like the makers mellow yellow
      >> product. Might buy a gallon if you like it and dilute as specified.
      >>
      >> Take care,
      >> Stan
      >>
      >> On 07/10/2014 01:18 PM, Jerry Durand jdurand@...
      >> [MILL_DRILL] wrote:
      >>> Since someone mentioned the Enco #1 Cutting fluid was good stuff, I got
      >>> a bottle to try. I haven't had a chance to try it yet, but for general
      >>> info, here's the MSDS for it
      >>> http://www1.mscdirect.com/MSDS/MSDS00016/00229815-20050716.PDF
      >>>
      >>> I notice that it is a "water based product" made for Enco by Synthetic
      >>> Lubricants, inc.
      >>>
      >>> It's listed as "very dilute" and therefore the hazardous material in it
      >>> is too dispersed to be of much concern in normal use.
      >>>
      >>
      >>
      >>
      >>
      >>
      >
      >
      >
      > ------------------------------------
      >
      > ------------------------------------
      >
      >
      > ------------------------------------
      >
      > Yahoo Groups Links
      >
      >
      >
    • Show all 8 messages in this topic