Loading ...
Sorry, an error occurred while loading the content.

33939RE: Re: [mill_drill] Oile or grease?

Expand Messages
  • gmiller4396
    Sep 14, 2013

      It looked like old caked grease residue was in the chuck when I used brake cleaner and lacquer thinner on the parts, and I didn't know if I had to worry about grease catching chips. The easiest way I've found to do research is to just ask here and get to the point.




      --- In mill_drill@yahoogroups.com, <mill_drill@yahoogroups.com> wrote:



      On Fri, Sep 13, 2013 at 1:34 PM, <d.seiter@...> wrote:

      I thought you weren't supposed to use any lube on scrolls; maybe that's just in some situations?


      From: gmiller4396@...
      To: "mill drill" <mill_drill@yahoogroups.com>
      Sent: Friday, September 13, 2013 8:38:00 AM
      Subject: [mill_drill] Oile or grease?

      I acquired an old 5" Union 3-jaw chuck, and after disassembling it and soaking it in Evaporust, mainly to clean it up real nice, no rust of any kind, I now need to put it back together.


      Any recommendations on whether to oil the scroll, or lightly use some kind of grease on it? 




    • Show all 5 messages in this topic