Loading ...
Sorry, an error occurred while loading the content.

32353RE: [mill_drill] Re: Belt sizes for Jet JMD 18?

Expand Messages
  • Bill
    Jan 30, 2013
    • 0 Attachment

      You’re welcome Craig,

       

      Good luck with your project, and have fun! Let us know how it turns out….maybe a pic or two!

       

      Bill

       

      From: mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com] On Behalf Of csuslosky
      Sent: Wednesday, January 30, 2013 3:31 AM
      To: mill_drill@yahoogroups.com
      Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?

       

       

      Thank you, Ill give it a look to see, maybe thats why they changed them from the book, or maybe the book is printed wrong, not a big deal. Thank you for your help again.
      Craig

      --- In mill_drill@yahoogroups.com, Bill wrote:
      >
      > There's some room for adjustment... its entirely possible either the v-belt
      > set listed in the book, or the set you removed will work.
      >
      >
      >
      > Comparing what is listed in the book, to what you have...note that the B33
      > vs B34, and the B42, vs the B41. First one is an inch longer, and the other
      > is an inch shorter.
      >
      > Overall dim between the spindle pulley & the motor pulley will remain about
      > the same, but the idler position will change between the two belt
      > configurations. You might do some playin' around and measuring..and see
      > which set up is best. Wouldn't want to run out of idler travel after the
      > belts stretch, which is very possible.
      >
      >
      >
      > Bill
      >
      >
      >
      > From: mill_drill@yahoogroups.com [mailto:mill_drill@yahoogroups.com] On
      > Behalf Of csuslosky
      > Sent: Tuesday, January 29, 2013 6:41 PM
      > To: mill_drill@yahoogroups.com
      > Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?
      >
      >
      >
      >
      >
      >
      > Thanks Bill! Now I just have to figure out why the book lists different
      > numbers than my actual belt have on them. Im gonna check out the gates site,
      > Im from a small town and cant get them locally I dont believe. Thank you
      > again for your help
      > Craig
      >
      > --- In mill_drill@yahoogroups.com ,
      > Bill wrote:
      > >
      > > Oh..while I'm on it...
      > >
      > > ...a good place to look for v-belts..is Gates...
      > > http://www.gates.com/part_locator/index.cfm
      > >
      > > Kinda weird to navigate..but a lot of info there once you noodle it out.
      > >
      > >
      > >
      > > You can download the complete power transmission catalog in pdf here:
      > > http://www.gates.com/catalogs/file_display.cfm?file=2012%20Catalog.pdf
      > >
      > Path=gates\catalogs&requesting=ptcatalog&location_id=2999>
      > > &thisPath=gates\catalogs&requesting=ptcatalog&location_id=2999
      > >
      > > 12MB..
      > >
      > >
      > >
      > > Bill
      > >
      > >
      > >
      > > From: mill_drill@yahoogroups.com
      > [mailto:mill_drill@yahoogroups.com ]
      > On
      > > Behalf Of csuslosky
      > > Sent: Tuesday, January 29, 2013 5:07 PM
      > > To: mill_drill@yahoogroups.com
      > > Subject: [mill_drill] Re: Belt sizes for Jet JMD 18?
      > >
      > >
      > >
      > >
      > >
      > >
      > > Dan
      > > Thank you. My belt numbers are as follows, B34 and B41, is it as simple as
      > > crossing over to BX34 and BX 41? Thanks for your help everyone.
      > > Craig
      > >
      > > --- In mill_drill@yahoogroups.com ,
      > > "Dan and Marlene Coleman" wrote:
      > > >
      > > > You are wanting BX belts. They are the cogged belts and transmit power a
      > > > little better on smaller pulleys.
      > > >
      > > >
      > > >
      > > > Dan Coleman
      > > >
      > > >
      > > >
      > > > From: mill_drill@yahoogroups.com
      > > [mailto:mill_drill@yahoogroups.com
      > ]
      > > On
      > > > Behalf Of csuslosky
      > > > Sent: Monday, January 28, 2013 7:51 PM
      > > > To: mill_drill@yahoogroups.com
      > > > Subject: [mill_drill] Belt sizes for Jet JMD 18?
      > > >
      > > >
      > > >
      > > >
      > > >
      > > > I have a Jet JMD-18 mill that Im cleaning up, I need the correct belt
      > > sizes,
      > > > lengths or numbers. I want to try the gates ones that are "cogged" on
      > the
      > > > inside, if thats the correct term. The local stores dont have these
      > belts
      > > so
      > > > I will have to order them online. Eventually I will get the linked
      > belts,
      > > > but not now. Thanks for the help.
      > > >
      > >
      > >
      > >
      > > _____
      > >
      > > No virus found in this message.
      > > Checked by AVG - www.avg.com
      > > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
      > >
      >
      >
      >
      > _____
      >
      > No virus found in this message.
      > Checked by AVG - www.avg.com
      > Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13
      >


      No virus found in this message.
      Checked by AVG - www.avg.com
      Version: 2013.0.2890 / Virus Database: 2639/6055 - Release Date: 01/24/13

    • Show all 11 messages in this topic