Loading ...
Sorry, an error occurred while loading the content.

25271Re: [mill_drill] Newbie

Expand Messages
  • Glenn N
    Feb 8, 2010
    • 0 Attachment
      Snag,

      Try a bit of grease on the splines of the spindle shaft. Mine rattles a bit
      when it is dry.

      Glenn Neff
      Medford, OR
      ----- Original Message -----
      From: "Snag" <snag_one@...>
      To: <mill_drill@yahoogroups.com>
      Sent: Monday, February 08, 2010 9:53 AM
      Subject: Re: [mill_drill] Newbie


      The only thing I've found is that it's noisy when
      doing heavy cuts with a single insert cutter or flycutter . It kinda rattles
      and clatters a bit especially at the lower speeds .



      Snag
      "90 FLHTCU "Strider"
      '39 WLDD "PopCycle"
      BS 132/SENS/DOF
    • Show all 25 messages in this topic