- ... Evan, I have to admit that due to the Nascom popularity in Europe that they had made their way over to the USA too. I have looked to see if I can find anyMessage 1 of 4 , Mar 23 8:48 AMView Source--- In email@example.com, "Evan Koblentz" <evan@...> wrote:
> >> I have been reading about your activities and event with great interest; one of the liveliest groups I have had the pleasure to be a member of.
> Thank you. We try!
> >> I didn't see mention of ... Nascom
> I never heard of that until you joined our list. Was it only sold in Europe?
> Let us know if you ever visit our side of the pond.
I have to admit that due to the Nascom popularity in Europe that they had made their way over to the USA too. I have looked to see if I can find any detail about export of them but not been successful.
The is a very brief summary on Wikipedia:
And a good deal of documentation and detail here:
and a blog here: http://nascom-uk.blogspot.co.uk/
If I ever come your way I shall call in - probably not with the Nascom though!
- ... Yipes! More Z80s are coming out of the woodwork! Most folks are familiar with Sir Clive Marles Sinclair s Z80 systems: the ZX80, ZX81 and T/S 1000.Message 2 of 4 , Mar 24 3:19 PMView Source--- In firstname.lastname@example.org, "Mike Strange" <mjstrange@...> wrote:
> I didn't see mention of anyone taking a Nascom to the show;Yipes! More Z80s are coming out of the woodwork!
> very much a homebrew computer of the 70s
Most folks are familiar with Sir Clive Marles Sinclair's Z80 systems: the ZX80, ZX81 and T/S 1000.
Unless there was an article or advertisement for the system in one's favorite journal (Popular Electronics, Radio Electronics, Computer Shopper, Nuts and Volts), or a user group at the Trenton Computer Fest, there was no way to know of it.
The closest I came was almost assembling a Xerox 820 "bigboard" from parts, but I gave up when they went surplus so cheap it was not worth assembling it myself.
My Timex Sinclair 1000 was my only cassette system. I held off long enough that my first bare SBC was a Servo-8 with floppy disks: 6 MHz Z80, 64k DRAM, a few on board controllers.
Despite the slight technical advantage over the Ampro Littleboard, in retrospect I regret not going the Ampro way since they had great community support and continued to grow, particularly with SCSI as a networking alternative.