Re: [midatlanticretro] Nascom User Group
>> I have been reading about your activities and event with great interest; one of the liveliest groups I have had the pleasure to be a member of.Thank you. We try!
>> I didn't see mention of ... NascomI never heard of that until you joined our list. Was it only sold in Europe?
Let us know if you ever visit our side of the pond.
- --- In email@example.com, "Evan Koblentz" <evan@...> wrote:
> >> I have been reading about your activities and event with great interest; one of the liveliest groups I have had the pleasure to be a member of.
> Thank you. We try!
> >> I didn't see mention of ... Nascom
> I never heard of that until you joined our list. Was it only sold in Europe?
> Let us know if you ever visit our side of the pond.
I have to admit that due to the Nascom popularity in Europe that they had made their way over to the USA too. I have looked to see if I can find any detail about export of them but not been successful.
The is a very brief summary on Wikipedia:
And a good deal of documentation and detail here:
and a blog here: http://nascom-uk.blogspot.co.uk/
If I ever come your way I shall call in - probably not with the Nascom though!
- --- In firstname.lastname@example.org, "Mike Strange" <mjstrange@...> wrote:
> I didn't see mention of anyone taking a Nascom to the show;Yipes! More Z80s are coming out of the woodwork!
> very much a homebrew computer of the 70s
Most folks are familiar with Sir Clive Marles Sinclair's Z80 systems: the ZX80, ZX81 and T/S 1000.
Unless there was an article or advertisement for the system in one's favorite journal (Popular Electronics, Radio Electronics, Computer Shopper, Nuts and Volts), or a user group at the Trenton Computer Fest, there was no way to know of it.
The closest I came was almost assembling a Xerox 820 "bigboard" from parts, but I gave up when they went surplus so cheap it was not worth assembling it myself.
My Timex Sinclair 1000 was my only cassette system. I held off long enough that my first bare SBC was a Servo-8 with floppy disks: 6 MHz Z80, 64k DRAM, a few on board controllers.
Despite the slight technical advantage over the Ampro Littleboard, in retrospect I regret not going the Ampro way since they had great community support and continued to grow, particularly with SCSI as a networking alternative.