- ... Thanks Wesley, and thanks to your coworker as well. Here s a better picture of the actual printer I have: http://i.imgur.com/KLROR89.jpg And yes, I expectMessage 1 of 7 , Feb 25, 2013View SourceOn Mon, Feb 25, 2013 at 7:43 AM, Wesley Furr <wesley@...> wrote:Kyle,I passed your message on to someone I work with now, and worked with two jobs back too. "Back in the day" of the other job, they used to use Sperry/Unisys equipment...so I passed along your note in case he knew something about your printer. I personally worked with some of the leftover big MT band printers...but nothing smaller that had that name on it. Here's his response:Well – up until I displayed the picture I thought I was familiar with the printer. I have dealt with MT printers in the past – I don’t think they had the Unisys name on them though. The picture and the MT printer I have in mind do not match.The MT’s that I played with had a menu that would allow the print of the current and all possible settings – it printed quite a long list of configurable parameters.If the printer has the Unisys name on it – it may have a butchered serial interface. Depending on what the printer was connected to in its Unisys life, it may not be a typical serial connection. Long ago we purchased an Epson printer to replace a Unisys (maybe even Sperry) printer and there was a slight change to the serial settings to get it to talk to a Unisys terminal. But this slight change was made with a dip switch.In the very last paragraph there is a statement…” but I honestly didn't expect the printers to hold me back!”In my experience – printers ALWAYS hold you back. I thought at one point that printers and modems would cause the end of life as we know it.Sorry – a lot of words - not much help…..djpHope this is of some help...Thanks,WesleyThanks Wesley, and thanks to your coworker as well.Here's a better picture of the actual printer I have: http://i.imgur.com/KLROR89.jpgAnd yes, I expect *modern* printers to hold me back, but c'mon...a dot matrix from 1988? Give me a break! :)Kyle
- ... I think a lot of the old Sperry/Unisys stuff was 7-bit even parity. That might be what the printer is expecting for serial data. Try setting the comm portMessage 2 of 7 , Feb 25, 2013View Source
> RS-232 is still very confusing to me. I've got a Northstar Horizon that canI think a lot of the old Sperry/Unisys stuff was 7-bit even parity. That might be what the printer is expecting for serial data.
> use one type of cable to interface with a terminal or my USB-serial
> adapter, but my Data I/O EPROM programmer requires a null modem cable, as
> does my Tandy 200, if I recall. I've tried the null modem cable with the
> printer and was getting garbage characters, which tells me I'm on the right
> track, I suppose.
Try setting the comm port to that if you can and send it data again using the null modem cable.
Serial is "simple" in some respects in that it is mostly understandable, and slow enough to troubleshoot a bit with an inexpensive scope. rx on one end goes to tx on the other. There are two basic types of devices DTE and DCE. DTE devices are meant to connect to DCE devices, the null modem converts one end from one flavor to another. See http://en.wikipedia.org/wiki/Data_terminal_equipment for some background. Handshaking gets a bit bothersome sometimes, but us usually understandable.
Don't expect too much data back from the printer other than handshaking. Serial printers were typically bit consumers not bit producers.
- Well...if you go back far enough before serial and centronics were very standardized... :-) Someone else comment about 7E and presumably 1 for serialMessage 3 of 7 , Feb 25, 2013View SourceWell...if you go back far enough before serial and centronics were very standardized... :-) Someone else comment about 7E and presumably 1 for serial settings...that would seem to go along with the comment about a serial setting change. Gotta love all the serial options! Like I've heard it said before...the great thing about standards is there are so many to choose from!Good luck!WesleyFrom: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of Kyle OwenThanks Wesley, and thanks to your coworker as well.Here's a better picture of the actual printer I have: http://i.imgur.com/KLROR89.jpgAnd yes, I expect *modern* printers to hold me back, but c'mon...a dot matrix from 1988? Give me a break! :)Kyle