Loading ...
Sorry, an error occurred while loading the content.

Re: Hazletine 1510

Expand Messages
  • dfnr2
    ... Bill, That would be fantastic. Thanks so much. Dave
    Message 1 of 42 , Nov 19, 2012
    • 0 Attachment
      --- In midatlanticretro@yahoogroups.com, "B. Degnan" <billdeg@...> wrote:
      >
      > Thank you Dave - on a related note I found the two OSI Peek[65]'s that
      > you're missing. I will scan and send to you asap.
      > Bill

      Bill, That would be fantastic. Thanks so much.

      Dave


      >
      > -------- Original Message --------
      > > From: "dfnr2" <dfnr2@...>
      > > Sent: Sunday, November 18, 2012 3:46 PM
      > > To: midatlanticretro@yahoogroups.com
      > > Subject: [midatlanticretro] Re: Hazletine 1510
      > >
      > > OK, As promised, I finally got the manual scanned and turned into a
      > proper PDF. It took a while, since I was unable to scan the large 11x17
      > pages on by myself. It's a substantial manual, in the true 70's tradition.
      > Since the manual is so large, I ran the OCR, added links in the table of
      > contents, and also added a bookmark tree, to aid in navigation.
      > >
      > > It's a huge file, so to simplify access, I have uploaded it to
      > osiweb.org. Look in the Manuals section. The direct link is:
      > http://www.osiweb.org/manuals/hazeltine1500_maintenance.pdf
      > >
      > > If you have a Hazeltine 15x0, you want this manual!
      > >
      > > Bill, I believe this should have all the information you need to sort our
      > your issues with the 1510.
      > >
      > > Enjoy!
      > >
      > > Dave
      > >
      > > --- In midatlanticretro@yahoogroups.com, "B. Degnan" <billdeg@>
      > wrote:
      > > >
      > > >
      > > > >
      > > > >
      > > > > I have the service manual that covers the 1500-only board, and the
      > > > combined 1500/1510/1520 board. If you are trying to fix a terminal,
      > you
      > > > will find it very helpful, as it has troubleshooting flowcharts, theory
      > of
      > > > operation, etc. I will be happy to send you a copy, and also will
      > place a
      > > > copy on osiweb.org.
      > > > >
      > > > > There's also a copy of the user manual on classiccmp, that may be
      > useful
      > > > for switch settings.
      > > > >
      > > > > I don't know if my Hazeltine works or not--with a new baby, I haven't
      > had
      > > > much time for my hobbies, and it's in storage. It is "in the queue".
      >
      > > > However, I can't imagine it will be too difficult to bring it up.
      > > > >
      > > > > BTW, It might be nice to preserve (and host online) the 1500 and 1510
      >
      > > > firmware, and the 1520 firmware as well, if anyone has one of those.
      > > > >
      > > > > Dave
      > > > >
      > > >
      > > > Dave,
      > > > Sorry, I did not realize you were the OSI Dave...In exchange I will
      > send
      > > > you Vol 4.8 and Vol 4.12 of PEEK[65].
      > > > Bill
      > > >
      > >
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      >
    • evan@snarc.net
      ... For that particular computer, yes.
      Message 42 of 42 , Dec 20, 2012
      • 0 Attachment
        >>> Straight-8 repair is reserved for Gesswein, with McGuire etc. as apprentice.

        >> "Apprentice", eh? ;)

        For that particular computer, yes.
      Your message has been successfully submitted and would be delivered to recipients shortly.