Re: C64 Help
- --- In email@example.com, Ray Sills <raysills3@...> wrote:
>Saw that RCA Jack next to the classic channel 3-4 switch. I'll prefer getting it running with the 1702 or another Commodore monitor if need be.
> And, the C-64 had an RF modulator on board, so you could connect it to
> a TV set that receives NTSC (analog) signals. Most TV sets, even
> todays flat panel HD TV units will accept analog signals.
> 73 de Ray
>Yes, In my opinion you are correct.
> Here's a transistor with 430 on it. Would that make it 1964, week 30?
> Transistor part number is 2N1218. Or does the 430 refer to the factory the
> transistor was made? or other?
> Photo of transistor posted in the photos/Josh Bensadon folder of this group.
> I've seen some IC's with only a 3 digit code on them (not part of this analog
> computer). Case in point is the following:
> RCA H 650
> Is that to mean 1976 week 50?
> H being the factory where it was made?
In the early years of semiconductors most parts have three digit date codes.
You have to know the approximate decade the part was first produced to get the
Sometimes you have trouble telling the part number apart from the date code.
In the 1970s a lot of the 7400 series ic's had date codes like 7414 and a part
number like 7404.
I was always having trouble with those.
A good history of early transitor marking can be found here.