Loading ...
Sorry, an error occurred while loading the content.

Re: [midatlanticretro] Re: Franklin Ace 1000/1200 error codes

Expand Messages
  • B Degnan
    ... Thanks Bob.....I have tried a few disks that I know work on an Apple II Plus, so I expect this is a RAM issue. Hope it s not a epROM issue anyway. Bill
    Message 1 of 3 , Jun 5, 2012
    • 0 Attachment
      At 12:49 PM 6/5/2012, you wrote:
      > > Does anyone have a listing of Franklin ACE 1000/1200 error or
      > > diagnostic codes? My ROM version 2.3 1200 bombs to the ROM monitor
      > > and reports the following error when I attempt to boot from a diskette.
      > >
      > > 3715- A=A0 X-60 Y=F0 P=B4 S=F6
      >
      >Those aren't diagnostic codes, just a dump of registers of the
      >processor. 3715 is probably the address where it encountered
      >something bad but I forget what else the address might
      >indicate. The A, X, Y, P and S values are the registers.
      >
      >I suspect either RAM is bad or the disk contains code that isn't right.
      >
      >As far as a listing of code, just look inside any book on the Apple
      >][ ;-) Seriously, it depends on whether the code that crashed was
      >from disk or in the EPROMs.
      >
      >Bob



      Thanks Bob.....I have tried a few disks that I know work on an Apple
      II Plus, so I expect this is a RAM issue. Hope it's not a epROM issue anyway.

      Bill
    Your message has been successfully submitted and would be delivered to recipients shortly.