Loading ...
Sorry, an error occurred while loading the content.

Re: [midatlanticretro] Re: Classic Ethernet for VCF-E?

Expand Messages
  • system@great-escape.tmesis.com
    ... Pretty much so...
    Message 1 of 59 , May 2 7:51 AM
    • 0 Attachment
      Neil Cherry <ncherry@...> writes:

      >--3CXBIGrbOV8KduZw-ZUy5fHna8NbtrbPBy7ylX6 Content-Type: text/plain;
      >charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
      >
      >The good news is that if we can get our hands on some Vintage Cisco
      >routers we can pretty much network anything that supported Ethernet
      >formatted packets. At layer 2 the Ethernet packets are all the same, as
      >far as dumb layer 2 devices are concerned (this applies to anything that
      >used 10Base2, 10Base5 or 10BaseT).

      Pretty much so...
    • system@great-escape.tmesis.com
      ... Pretty much so...
      Message 59 of 59 , May 2 7:51 AM
      • 0 Attachment
        Neil Cherry <ncherry@...> writes:

        >--3CXBIGrbOV8KduZw-ZUy5fHna8NbtrbPBy7ylX6 Content-Type: text/plain;
        >charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
        >
        >The good news is that if we can get our hands on some Vintage Cisco
        >routers we can pretty much network anything that supported Ethernet
        >formatted packets. At layer 2 the Ethernet packets are all the same, as
        >far as dumb layer 2 devices are concerned (this applies to anything that
        >used 10Base2, 10Base5 or 10BaseT).

        Pretty much so...
      Your message has been successfully submitted and would be delivered to recipients shortly.