Loading ...
Sorry, an error occurred while loading the content.
 

Re: [midatlanticretro] so...vcf enhibitors how goes it?

Expand Messages
  • Dave McGuire
    ... Great news! I am dying to see this system in action. -Dave -- Dave McGuire, AK4HZ New Kensington, PA
    Message 1 of 59 , Apr 30, 2012
      On 04/30/2012 07:14 PM, Mike Loewen wrote:
      > I finally have good news to report: my HP2109E is running RTE-6/VM!
      > The 2647A terminal is connected to the 2109E as the system console, and
      > the HPDrive emulator is pretending to be a 7925H (120MB) hard drive.
      > Many problems had to be overcome, including an incorrectly installed
      > ribbon cable (not by me), bugs in both the stable (3.01) and current beta
      > (4.0beta4) versions of HPDrive, and an incorrectly sized disc image in the
      > SimH kit.
      >
      > None of this would have been possible without the assistance of J.
      > David Bryan, who wrote the HP2100 simulator for SimH and collaborates on
      > the HPDrive software. Thanks, Dave!

      Great news! I am dying to see this system in action.

      -Dave

      --
      Dave McGuire, AK4HZ
      New Kensington, PA
    • system@great-escape.tmesis.com
      ... Pretty much so...
      Message 59 of 59 , May 2, 2012
        Neil Cherry <ncherry@...> writes:

        >--3CXBIGrbOV8KduZw-ZUy5fHna8NbtrbPBy7ylX6 Content-Type: text/plain;
        >charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
        >
        >The good news is that if we can get our hands on some Vintage Cisco
        >routers we can pretty much network anything that supported Ethernet
        >formatted packets. At layer 2 the Ethernet packets are all the same, as
        >far as dumb layer 2 devices are concerned (this applies to anything that
        >used 10Base2, 10Base5 or 10BaseT).

        Pretty much so...
      Your message has been successfully submitted and would be delivered to recipients shortly.