- ... You don t always hear a zap . The picture tube acts like a large capacitor which stores a charge. The charge will eventually bleed off, at varyingMessage 1 of 18 , Aug 1, 2011View SourceOn 08/01/2011 02:34 PM, Ed wrote:
> One of my Model IV(s) has a display adapter issue--from theYou don't always hear a 'zap'. The picture tube acts like a large
> conversation here and on the TRS-80 group, I'm now pursuing replacing
> all of the electrolytic capacitors to see if that helps. My biggest
> concern was getting past discharging the anode of the tube. I
> followed the procedure but never heard a zap. I waited several days
> and tried again and no zap. I eventually got enough courage to
> remove the anode connector, now I have the board out and I have to
> start getting the parts I need to fix it.
capacitor which stores a charge. The charge will eventually bleed off,
at varying rates, so by the time you get to working on it the charge may
have bled off enough not to give you that nice audible feedback.
That said, just do the discharge procedure (twice if you're shy) and
you'll be good to go. FWIW, the charge on a picture tube is not lethal
-- it just hurts like hell. Ask me how I know...
- All, ... I am currently in the process of figuring out exactly how many I have that are working/not-working. ... I like the 1541 swing down drive door. IMessage 2 of 18 , Aug 1, 2011View SourceAll,
> Quick check - how many *working* 1541 drives do MARCH members haveI am currently in the process of figuring out exactly how many I have that
> for personal use? I am talking drives that can read/format disks
> without incident, and have been tested in the past 3 years. What doI like the 1541 swing down drive door. I *hate* the spring eject, since it
> you think is the best 1541 drive model (VIC 1541, Alps 1541 (with
> press down drive door), 1541 (with swing down driive arm), 1541-II,
usually will jam. I don't have a 1541-C. I have a few 1541-II, but have not
tried or tested them yet. I have heard that they are not 100% compatible,
more like 99%. For years I had no problems with my original 1541, until I
connected it to a PC with an XE/1541 cable, then it stopped working
properly. Along with a few more 1541 and a 1571.
> For Commodore users, what is your favorite drive? Does anyone useI like the FD-4000, but it is only for use with 3 1/2" floppies. I like that
> the 1581 or 1571 drives? SFD-1001?
it has built in Jiffy-DOS. I have used the 1581 for mass storage of many
programs. And once I get back into GEOS or similar OS (Wheels OS etc), then
I will use it more. When I first got the 1581, I would consolidate many 1541
disks onto one 1581 3 1/2 disk.
- ... FYI - We have disk drive controllers for sale (under billdeg) on Ebay. I have found that sometimes replacing the controller does the trick. BillMessage 3 of 18 , Aug 3, 2011View SourceAt 02:22 PM 8/1/2011, you wrote:
>I would need to know when and where to drive to pick anything up, and whatFYI - We have disk drive controllers for sale (under billdeg) on
>payment or donation would be required.
>Does anyone know what might be wrong with the Model III Computers?
>Replacing RAM or Capacitors or Disk Drives I can do. More involved trouble
>shooting is beyond me.
Ebay. I have found that sometimes replacing the controller does the trick.