Loading ...
Sorry, an error occurred while loading the content.

Re: [midatlanticretro] Multimachine Games using 2 PET 2001s

Expand Messages
  • Bill Degnan
    ah. At first I was trying to make this work through the IEEE-488 port. That was going noplace! ... right?
    Message 1 of 7 , Apr 23, 2010
    • 0 Attachment
      ah. At first I was trying to make this work through the IEEE-488 port.
      That was going noplace!

      -------- Original Message --------
      > From: "Dan Roganti" <ragooman@...>
      > Sent: Friday, April 23, 2010 12:04 PM
      > To: midatlanticretro@yahoogroups.com
      > Subject: Re: [midatlanticretro] Multimachine Games using 2 PET 2001s
      >
      > Bill Degnan wrote:
      > > The converter is already operating at serial cable voltage not TTL,
      right?
      > >
      >
      > I took a closer look at that cable in the BYTE article, that's actually
      > a modified parallel cable, I was mistaken in thinking it was a TTL
      > serial interface. It's still a TTL interface but on the parallel port,
      > it would need an additional adapter to convert the data and control
      > signals into serial data first which can then be connected to that
      > Serial to Ethernet Gateway adapter. -- back to the drawing board
      >
      > =Dan
      >
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.