Loading ...
Sorry, an error occurred while loading the content.

RE: [midatlanticretro] Saga of the Commodores in Summit, NJ

Expand Messages
  • Degnan
    John, I wish to add to my earlier remarks that the money spent is really inconsquential compared to the great haul...I don t want to seem critical of what you
    Message 1 of 7 , Nov 4, 2005
      I wish to add to my earlier remarks that the money spent is really
      inconsquential compared to the great haul...I don't want to seem
      critical of what you did in the bigger picture for MARCH and vintage
      computing. I would have done the same thing.
      Bill D
    • Jim Scheef
      Message 2 of 7 , Nov 4, 2005

        --- john_apw <infomagic@...> wrote:

        > Gentlemen:
        > This will be a rather detailed report of my activities in the matter
        > of "Commodore Computers in Summit, NJ". ("Detailed" = long winded,
        > but hopefully informative...)
        > I saw the notice in the digest yesterday morning (Wednesday, 02 NOV
        > 2005) and I sent an email to Lou, the contact person.
        > I received a phone call at about 11:30am. He told me that he had a
        > number of old computers that his son was going to put up on eBay,
        > but they were uncomfortable with shipping monitors, etc. He wanted
        > his son to make some money, and when they checked the winning eBay
        > bids for similar systems, they thought they might make $300 or $400,
        > but it would involve a lot of work and time, trips to the Post
        > Office, etc. To see if they could avoid the hassle, he contacted the
        > winner and loser of an eBay auction to see if they would be
        > interested. Instead, he was referred to the list. Thus the first
        > message.
        > I was preparing to arrange to see the equipment over the weekend
        > when he expressed the urgency: the stuff was in a house being
        > cleaned out and anything his son didn't take to sell that was still
        > there on Friday (tomorrow) would go into the dumpster. I asked if I
        > could come right over, and he said yes. An hour later I was there
        > and found out what was going on.
        > Seems that Lou is one of three guys who bought the house to re-
        > develop, following the death at around age 80 of the sole owner, a
        > fellow named David Z. Lou and his partners are preparing to gut and
        > renovate the place, but the deceased had no relatives, and all his
        > stuff was there, and it all has to be removed. Lou had someone buy
        > furniture, etc. and when I explained the MARCH museum, he liked the
        > idea that the stuff would go where it would be appreciated. So he
        > gave me an exclusive on whatever I thought would be useful. He
        > showed me around the place and I took mental notes. Then he
        > mentioned that he had already removed some computers to his house,
        > but would bring them back for me. Then he mentioned again that he
        > wanted his son to get some money out of this. I told him we had no
        > budget, but that I would see what I could do personally. He said he
        > wanted $200, and I told him that I wasn't sure there was enough
        > equipment to warrant that. But he hinted that I might change my mind
        > when he brought back the other computers in the morning (Thursday).
        > So, we agreed to gather all the computer stuff in the morning, and
        > meanwhile he let me rummage around and take stuff I wanted. (Evan,
        > this was when I was calling you to discuss truck rental, etc.
        > Unfortunately, I can't take a Wurlitzer organ that Davi Z. built
        > from kits...It's got a curved wood cabinet, two keyboards and stops,
        > foot pedals and a cushioned bench; just too big for me to take it or
        > store it...)
        > Well, it seems that David was some sort of engineer and a total
        > recluse. His little old house, with many tiny rooms, and little
        > twisty passages, all alike, was packed wall-to-wall with radios,
        > electronic components, audio equipment, computers, etc. He had one
        > room with several systems on desks, another room set up like a
        > repair shop, another with ham radio, and another with several
        > computers, tons of software, and more components (looked just like
        > the *old* Radio Shack store layouts!). This guy was a packrat of the
        > most intense degree! He had a cache of empty boxes that he used for
        > organizing all the equipment repair projects - from radios,
        > telephone, to sewing machines, can openers, and food mixers! There
        > must have been just dozens of empty boxes alone - not to mention all
        > the shelves with boxes that had stuff in them...
        > Mostly everything was carefully labeled, sometimes including notes
        > about operational characteristics ("a few pixels bad", "motor noise
        > in output audio", "this cable for xyz unit" etc.).
        > So, on the theory that our local radio museum might be interested in
        > some of the radio equipment, I started packing the car with
        > shortwave radios, transistor radios, etc. Then I started packing
        > test meters. Then I went for some of the spare parts. I also packed
        > a typewriter and an old 1950's era HiFi. (Also a calculator or
        > two...) In the long run, I decided that other stuff had more
        > potential value than the small electronic components (resistors,
        > diodes), so I left them behind.
        > With the wagon full, I went home and planned for today. Lou had
        > building inspectors coming in the morning so I wouldn't be able to
        > start packing until around 10am. We agreed to touch base at 9am. I
        > really had no place to unload into, so I decided I'd use the morning
        > to bring the first load to the museum. Fred and I agreed to meet at
        > InfoAge at 8:00 in the morning. He wouldn't be around after noon, so
        > I was planning on a fast return to Summit, reload, and then back to
        > InfoAge. I went to the bank and took out cash, wondering whether or
        > not (besides the systems at the house) he'd have anything else
        > worthwhile. I also went to Staples and bought a bunch of storage
        > boxes.
        > So this morning, I made the trip, got there, met Fred, and we
        > unloaded the mostly radio stuff to a place in the basement just
        > outside the room designated for our use. Fred showed me the inner
        > room with all the shelves, and indicated that we could move the
        > stuff into the inner room and onto the shelves at some later time
        > (on the 12th, at least).
        > I drove back, and on the way Lou called me to say that the
        > inspectors would be late, so I should come back at 11. So instead of
        > going straight to Summit and saving ~25 miles, I headed back home to
        > handle some family business. That took longer than expected, so I
        > called Lou and let him know. When I got there at about 11:30, he
        > showed me the back of his pickup truck - LOADED with systems!!
        > We packed all that stuff into my wagon, then I set to work on moving
        > the (hopefully) working systems into the large boxes. Whenever
        > possible, I did NOT unplug cables from devices; rather I carefully
        > slid everything into the box together. It will take some care to
        > untangle everything, but if we work on one system at a time, it
        > shouldn't be a problem. (I felt that I had to do it this way in
        > order to avoid losing the relationships between units unfamiliar to
        > me - I didn't want unrelated things getting plugged in where they
        > shouldn't...) Meanwhile Lou searched the attic and retrieved a few
        > more systems and disk drives.
        > Two hours later, there was barely enough room in my car for me! I
        > had systems, printers, software, manuals, etc. etc. etc. (list will
        > follow below!) I could barely close the rear hatch!
        > I left Summit just before 2pm, and called Fred on his cellphone to
        > let him know, even though I knew he wasn't going to be at the
        > museum. I got there right at 3pm, checked in, and prepared to unload.
        > By 4pm, I had managed to move everything from the car AND from the
        > earlier drop-off (on the floor) into the inner room, onto the
        > shelves, and categorized roughly into groups of related things.
        > My day ended with the trip home, and this report. Total time
        > involved: yesterday ~ 5 hours, today ~9 hours. Miles driven: ~320.
        > Money spent $200 on equipment, $48 on boxes (not all were used),
        > plus gas (~$30). Phone calls: unallocated part of my monthly
        > minutes. Assessment: Well, I don't know about you, but I feel pretty
        > good about it!
        > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
        > OK, so what's in the basement?
        > Let me start with the non-computer stuff that we can use(?), or
        > give, sell, or barter with:
        > Radios
        > =====================
        > About 20 or 30 of various types (6 transistor, 8 trans, 12 trans, to
        > other portable shortware receivers). Various makes and models,
        > including a few Archer/Radio Shack, and some I don't recognize.
        > (NOTE: Some have batteries in them and they should be removed on the
        > 12th)
        > One Hi-Fi, probably early 1960's.
        > One cool desktop set with big dials, and a matching external
        > speaker, both in metal housings. Also two cigar boxes, one
        > containing photos of some people with the radio, presumably one of
        > the guys is David, and another cigar box filled with postcards from
        > the other ham/shortwave operators he made contact with. I believe
        > these additional materials may add value to whatever the hardware is
        > worth...
        > A box of vacuum tubes! Some used, but many in their individual
        > boxes.
        > Radio - Miscellaneous
        > =======================
        > A really cool FRAMED, COLOR chart of allocated and unallocated radio
        > frequencies in the Atlantic City area in 1947!!!
        > (The radio guys will wet their pants when they see this!!)
        > Meters and test equipment
        > =========================
        > Several VOMs; I think one was built from a kit.
        > A radio frequency generator, I think built from a kit.
        > A REALLY BIG and REALLY COOL LOOKING meter for measuring radio
        > signals.
        > Some other radio signal test stuff.
        > A resistor selection box and a capacitor selection box.
        > Two separate meters (one volts, one amps?), and rack-panel of meters
        > (several of each type?)
        > OK, and now the computer stuff
        > ====================================
        > The "working systems" include: (these also include the power
        > supplies)
        > ------------------------------
        > - Several Commodores (I think two are 64s, the other a 128), with
        > monitor, floppies, joystick...
        > - Another Commodore (64?) with floppy and really small printer
        > - A flat grey Atari system box (don't remember the number), with
        > monitor and keyboard
        > - Amiga 1000(?): system box, monitor, kbd, mouse, floppy drive
        > - extra Amiga boards
        > - As many boxes of disks and diskettes as I could find...
        > -------------------------------------------------
        > One Atari 400
        > One Atari 500
        > Three Atari 800
        > Two Atari 800XL
        > Two Commodoare PET COLOR
        > Four external disk drives - (I think 2 are 1581 or something like
        > that, and the other 2 are different).
        > Two Atari tape recorders
        > One Atari tape recorder, not boxed
        > Boards, cards, extenders, etc. for Atari
        > Four Apple IIc monitors
        > Two Tandy color computers
        > One Tandy line printer (IV?) not boxed but with cover
        > One Tandy floppy drive for CoCo
        > One small box of fanfold paper.
        > Some manuals for a Tandy 1000 (which I was not able to take)
        > A small box of boards marked for the TRS80 Model II (didn't ID
        > types, but there are probably 6 or 8 in the box)
        > An original IBM PC keyboard (in IBM-blue-and-white box)
        > Two other PC items (can't remember just now)
        > Several cartons of IBM PC software, including early releases of:
        > - Wordstar
        > - Clipper
        > - MS Excel
        > - more...
        > One Diablo 630 printer (with extra printwheels and ribbons! <VBG>),
        > not boxed and VERY HEAVY!!!
        > One Star Micronics printer (don't remember the number)
        > Ribbons for a Star printer (But I don't know if they're for the
        > above printer...)
        > Two small boxes of manuals and documents for TI-99/4a
        > One Atari TV game station
        > Two Magnavox Oddessy systems, not boxed
        > (if these have RCA-1802 microprocessors, I'm going to take one
        > back for examination...)
        > A bunch of unopened vinyl computer covers
        > One Smith-Corona Electra 110(?) typewriter, not boxed
        > Two cartons and a stack of other stuff, not identified... (I looked
        > and saw; I just don't remember right now -- I think there were
        > joysticks, a PONG game, and more...)
        > Three small boxes of calculators
        > WARNING: Evan is permitted to inspect these first and determine if
        > any are worth adding to his collection!!
        > A box of about 10 calculator covers
        > One fairly modern modem
        > ==================================================
        > OK, I know there are more things that I haven't listed, but this is
        > the best I can do at this time. We can double check on the 12th.
        > (By the way, for the 12th (and afterward), we DO need tables,
        > lights, and extension cords. (And hard hats?)
        > And I would REALLY love it if somehow we get a hand truck or palette
        > jack or something so that moving can be done with a lot less
        > effort!!)
        > BE ADVISED: there is very little room left on the shelves on the
        > left side of the room! I'm sure this stuff can be condensed and re-
        > organized, but I tried to keep things from getting too jammed, so
        > that they are visible for inventorying and examination.
        > Also, although he's a contractor doing a renovation, I explained to
        > Lou that when someone donates stuff, we keep their name with the
        > equipment, and I asked if he was interested in doing so. He laughed
        > and said "You paid for it - it's yours, John!" So, when it comes to
        > identifying where all this equipment came from, I think that I'd
        > like to indicate that the original owner before me was David Z. We
        > can get his full name and address from some of the boxes... Maybe we
        > can also do some biographical research to find out more about his
        > life and work...
        > ===================================================
        > So now you know "the rest of the story!"
        > ===================================================
        > I look forward to hearing your thoughtful assessment of what this
        > equipment is worth toward our museum's goals.
        > Thanks,
        > -John M.
        > Montclair, NJ
      Your message has been successfully submitted and would be delivered to recipients shortly.