Loading ...
Sorry, an error occurred while loading the content.

RE: [midatlanticretro] Apple SuperSerial ][ internal pinouts

Expand Messages
  • Kelly Leavitt
    Andy: That s it. Thanks, Kelly
    Message 1 of 4 , Aug 29, 2005
    • 0 Attachment
      Andy:

      That's it.
      Thanks,
      Kelly

      > -----Original Message-----
      > From: ahm [mailto:ahm@...]
      > Sent: Sunday, August 28, 2005 12:21 AM
      > To: kelly@...
      > Subject: Re: [midatlanticretro] Apple SuperSerial ][ internal pinouts
      >
      >
      > Hi Kelly,
      >
      > On Sat, Aug 27, 2005 at 01:26:40PM -0400, Kelly Leavitt wrote:
      > > Does anyone have the pinout of the INTERNAL connector on
      > the Apple Super
      > > Serial ][ card? I found one without the cable. I know what
      > the 25 pin
      > > connector pinout is, but I need to get from one to the other.
      >
      > I have a manual for an Apple "Super Serial Card".
      > But it doesn't call itself a "][", so I wonder if there might
      > have been
      > more than one model of Super Serial card.
      >
      > In case you can use this info...
      >
      > My manual shows a 10-pin header at location 7B of the circuit board.
      > And on page 98, Table C-1 "Connector Pin Assignments":
      >
      > 10-pin DB-25
      > Header Connector Signal name
      >
      > 1 1 Frame ground
      > 2 2 Transmit Data (TXD)
      > 3 3 Receive Data (RXD)
      > 4 4 Request To Send (RTS)
      > 5 5 Clear To Send (CTS)
      > 6 6 Data Set Ready (DSR)
      > 7 19 Secondary Clear To Send (SCTS)
      > 8 7 Signal Ground
      > 9 20 Data Terminal Ready (DTR)
      > 10 8 Data Carrier Detect (DCD)
      >
      > Cheers,
      > Andy
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.