Loading ...
Sorry, an error occurred while loading the content.

Help with Restoring an Altair 680

Expand Messages
  • Dan
    Hi, I tried posting on cctech, but haven t rcvd any replies yet. I was wondering if anyone might know where I can get the logo artwork reproduced for the front
    Message 1 of 10 , Aug 27, 2005
    • 0 Attachment
      Hi,

      I tried posting on cctech, but haven't rcvd any replies yet. I was
      wondering if anyone might know where I can get the
      logo artwork reproduced for the front on my Altair 680. This was an
      original computer my late brother bought as a kit back in the 70's. I
      helped him build this and we sure had some fun programming this. I'm
      finally getting around to restoring this. I dug it out from the last
      trip visiting them. All my stuff was stored in their garage since we
      moved.. The logo silkscreen has faded away alot there's nothing left
      that resembles a logo. I was hoping there is some way to restore this,
      either by replacing the front panel or getting this repainted(or
      silkscreened). In the meantime, I can get the hardware cleaned up and
      hopefully get this to run again.

      thanks,
      =Dan

      --
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
      [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
      [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



      --
      No virus found in this outgoing message.
      Checked by AVG Anti-Virus.
      Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
    • Evan
      I d suggest pinging Sellam for this question. He has a lot of experience in building replica parts. _____ From: midatlanticretro@yahoogroups.com
      Message 2 of 10 , Aug 27, 2005
      • 0 Attachment
        I'd suggest pinging Sellam for this question.  He has a lot of experience in building replica parts.


        From: midatlanticretro@yahoogroups.com [mailto:midatlanticretro@yahoogroups.com] On Behalf Of Dan
        Sent: Saturday, August 27, 2005 8:05 AM
        To: midatlanticretro@yahoogroups.com
        Subject: [midatlanticretro] Help with Restoring an Altair 680

        Hi,

        I tried posting on cctech, but haven't rcvd any replies yet. I was
        wondering if anyone might know where I can get the
        logo artwork reproduced for the front on my Altair 680. This was an
        original computer my late brother bought as a kit back in the 70's. I
        helped him build this and we sure had some fun programming this. I'm
        finally getting around to restoring this. I dug it out from the last
        trip visiting them. All my stuff was stored in their garage since we
        moved.. The logo silkscreen has faded away alot there's nothing left
        that resembles a logo. I was hoping there is some way to restore this,
        either by replacing the front panel or getting this repainted(or
        silkscreened). In the meantime, I can get the hardware cleaned up and
        hopefully get this to run again.

        thanks,
        =Dan

        --
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        [My Corner of Cyberspace                     http://ragooman.home.comcast.net/]
        [Pittsburgh Robotics Society                       http://www.pghrobotics.org/]
        [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/]
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



        --
        No virus found in this outgoing message.
        Checked by AVG Anti-Virus.
        Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005

      • Richard A. Cini
        Dan: Since MITS is out of business, there is no original source for the front panels. Having said that, from time to time 680b cases appear on eBay, so that s
        Message 3 of 10 , Aug 27, 2005
        • 0 Attachment
          Dan:

          Since MITS is out of business, there is no original source for the
          front panels. Having said that, from time to time 680b cases appear on eBay,
          so that's an option.

          You could use press-on/rub-on lettering in a pinch. The only other
          option is to recreate the front panel yourself using a service like Front
          Panel Express. For a panel that size it might cost $100 or so. I made one up
          for an original 8800 and it was $110.

          Rich

          -----Original Message-----
          From: midatlanticretro@yahoogroups.com
          [mailto:midatlanticretro@yahoogroups.com] On Behalf Of Dan
          Sent: Saturday, August 27, 2005 8:05 AM
          To: midatlanticretro@yahoogroups.com
          Subject: [midatlanticretro] Help with Restoring an Altair 680


          Hi,

          I tried posting on cctech, but haven't rcvd any replies yet. I was
          wondering if anyone might know where I can get the
          logo artwork reproduced for the front on my Altair 680. This was an
          original computer my late brother bought as a kit back in the 70's. I
          helped him build this and we sure had some fun programming this. I'm
          finally getting around to restoring this. I dug it out from the last
          trip visiting them. All my stuff was stored in their garage since we
          moved.. The logo silkscreen has faded away alot there's nothing left
          that resembles a logo. I was hoping there is some way to restore this,
          either by replacing the front panel or getting this repainted(or
          silkscreened). In the meantime, I can get the hardware cleaned up and
          hopefully get this to run again.

          thanks,
          =Dan

          --

          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          ~
          [My Corner of Cyberspace
          http://ragooman.home.comcast.net/%5d
          [Pittsburgh Robotics Society
          http://www.pghrobotics.org/%5d
          [Pittsburgh Vintage Comp.Society
          http://groups.yahoo.com/group/pghvintagecomp/%5d

          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          ~



          --
          No virus found in this outgoing message.
          Checked by AVG Anti-Virus.
          Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005





          Yahoo! Groups Links
        • billdeg@aol.com
          Sounds like fun...sorry I can only suggest that you try the Yahoo group altaircomputerclub. They have some regulars who can help I am sure.
          Message 4 of 10 , Aug 27, 2005
          • 0 Attachment
            Sounds like fun...sorry I can only suggest that you try the Yahoo group
            altaircomputerclub. They have some regulars who can help I am sure.

            http://groups.yahoo.com/group/altaircomputerclub/?yguid=101209920

            Bill

            In a message dated 8/27/2005 8:05:55 AM Eastern Standard Time,
            ragooman@... writes:

            > Hi,
            >
            > I tried posting on cctech, but haven't rcvd any replies yet. I was
            > wondering if anyone might know where I can get the
            > logo artwork reproduced for the front on my Altair 680. This was an
            > original computer my late brother bought as a kit back in the 70's. I
            > helped him build this and we sure had some fun programming this. I'm
            > finally getting around to restoring this. I dug it out from the last
            > trip visiting them. All my stuff was stored in their garage since we
            > moved.. The logo silkscreen has faded away alot there's nothing left
            > that resembles a logo. I was hoping there is some way to restore this,
            > either by replacing the front panel or getting this repainted(or
            > silkscreened). In the meantime, I can get the hardware cleaned up and
            > hopefully get this to run again.
            >
            > thanks,
            > =Dan
          • Dan
            OK, thanks Evan =Dan ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [My Corner of Cyberspace
            Message 5 of 10 , Aug 28, 2005
            • 0 Attachment
              OK, thanks Evan

              =Dan

              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
              [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
              [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



              Evan wrote:

              > I'd suggest pinging Sellam for this question. He has a lot of
              > experience in building replica parts.
              >
              > ------------------------------------------------------------------------
              > *From:* midatlanticretro@yahoogroups.com
              > [mailto:midatlanticretro@yahoogroups.com] *On Behalf Of *Dan
              > *Sent:* Saturday, August 27, 2005 8:05 AM
              > *To:* midatlanticretro@yahoogroups.com
              > *Subject:* [midatlanticretro] Help with Restoring an Altair 680
              >
              > Hi,
              >
              > I tried posting on cctech, but haven't rcvd any replies yet. I was
              > wondering if anyone might know where I can get the
              > logo artwork reproduced for the front on my Altair 680. This was an
              > original computer my late brother bought as a kit back in the 70's. I
              > helped him build this and we sure had some fun programming this. I'm
              > finally getting around to restoring this. I dug it out from the last
              > trip visiting them. All my stuff was stored in their garage since we
              > moved.. The logo silkscreen has faded away alot there's nothing left
              > that resembles a logo. I was hoping there is some way to restore this,
              > either by replacing the front panel or getting this repainted(or
              > silkscreened). In the meantime, I can get the hardware cleaned up and
              > hopefully get this to run again.
              >
              > thanks,
              > =Dan
              >
              > --
              > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              > [My Corner of Cyberspace
              > http://ragooman.home.comcast.net/%5d <http://ragooman.home.comcast.net/%5D>
              > [Pittsburgh Robotics Society
              > http://www.pghrobotics.org/%5d <http://www.pghrobotics.org/%5D>
              > [Pittsburgh Vintage Comp.Society
              > http://groups.yahoo.com/group/pghvintagecomp/%5d
              > <http://groups.yahoo.com/group/pghvintagecomp/%5D>
              > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              >
              >
              >
              > --
              > No virus found in this outgoing message.
              > Checked by AVG Anti-Virus.
              > Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
              >
              >
              > ------------------------------------------------------------------------
              > YAHOO! GROUPS LINKS
              >
              > * Visit your group "midatlanticretro
              > <http://groups.yahoo.com/group/midatlanticretro>" on the web.
              >
              > * To unsubscribe from this group, send an email to:
              > midatlanticretro-unsubscribe@yahoogroups.com
              > <mailto:midatlanticretro-unsubscribe@yahoogroups.com?subject=Unsubscribe>
              >
              > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
              > Service <http://docs.yahoo.com/info/terms/>.
              >
              >
              > ------------------------------------------------------------------------
              >
              >------------------------------------------------------------------------
              >
              >No virus found in this incoming message.
              >Checked by AVG Anti-Virus.
              >Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
              >
              >


              --
              No virus found in this outgoing message.
              Checked by AVG Anti-Virus.
              Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
            • Dan
              OK, I have the original 680 that I m looking to get a logo repainted. Thanks for the help Rich =Dan
              Message 6 of 10 , Aug 28, 2005
              • 0 Attachment
                OK,
                I have the original 680 that I'm looking to get a logo repainted.
                Thanks for the help Rich

                =Dan

                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
                [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
                [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



                Richard A. Cini wrote:

                > Dan:
                >
                > Since MITS is out of business, there is no original source for the
                > front panels. Having said that, from time to time 680b cases appear on
                > eBay,
                > so that's an option.
                >
                > You could use press-on/rub-on lettering in a pinch. The only other
                > option is to recreate the front panel yourself using a service like Front
                > Panel Express. For a panel that size it might cost $100 or so. I made
                > one up
                > for an original 8800 and it was $110.
                >
                > Rich
                >
                > -----Original Message-----
                > From: midatlanticretro@yahoogroups.com
                > [mailto:midatlanticretro@yahoogroups.com] On Behalf Of Dan
                > Sent: Saturday, August 27, 2005 8:05 AM
                > To: midatlanticretro@yahoogroups.com
                > Subject: [midatlanticretro] Help with Restoring an Altair 680
                >
                >
                > Hi,
                >
                > I tried posting on cctech, but haven't rcvd any replies yet. I was
                > wondering if anyone might know where I can get the
                > logo artwork reproduced for the front on my Altair 680. This was an
                > original computer my late brother bought as a kit back in the 70's. I
                > helped him build this and we sure had some fun programming this. I'm
                > finally getting around to restoring this. I dug it out from the last
                > trip visiting them. All my stuff was stored in their garage since we
                > moved.. The logo silkscreen has faded away alot there's nothing left
                > that resembles a logo. I was hoping there is some way to restore this,
                > either by replacing the front panel or getting this repainted(or
                > silkscreened). In the meantime, I can get the hardware cleaned up and
                > hopefully get this to run again.
                >
                > thanks,
                > =Dan
                >
                > --
                >
                > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                > ~
                > [My Corner of Cyberspace
                > http://ragooman.home.comcast.net/%5d <http://ragooman.home.comcast.net/%5D>
                > [Pittsburgh Robotics Society
                > http://www.pghrobotics.org/%5d <http://www.pghrobotics.org/%5D>
                > [Pittsburgh Vintage Comp.Society
                > http://groups.yahoo.com/group/pghvintagecomp/%5d
                > <http://groups.yahoo.com/group/pghvintagecomp/%5D>
                >
                > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                > ~
                >
                >
                >
                > --
                > No virus found in this outgoing message.
                > Checked by AVG Anti-Virus.
                > Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                >
                >
                >
                >
                >
                > Yahoo! Groups Links
                >
                >
                >
                >
                >
                >
                >
                > ------------------------------------------------------------------------
                > YAHOO! GROUPS LINKS
                >
                > * Visit your group "midatlanticretro
                > <http://groups.yahoo.com/group/midatlanticretro>" on the web.
                >
                > * To unsubscribe from this group, send an email to:
                > midatlanticretro-unsubscribe@yahoogroups.com
                > <mailto:midatlanticretro-unsubscribe@yahoogroups.com?subject=Unsubscribe>
                >
                > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
                > Service <http://docs.yahoo.com/info/terms/>.
                >
                >
                > ------------------------------------------------------------------------
                >
                >------------------------------------------------------------------------
                >
                >No virus found in this incoming message.
                >Checked by AVG Anti-Virus.
                >Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                >
                >


                --
                No virus found in this outgoing message.
                Checked by AVG Anti-Virus.
                Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
              • Dan
                Ok, I tried that too, I m waiting to hear from somebody, thanks Bill =Dan ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [My
                Message 7 of 10 , Aug 28, 2005
                • 0 Attachment
                  Ok, I tried that too, I'm waiting to hear from somebody, thanks Bill

                  =Dan

                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                  [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
                  [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
                  [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



                  billdeg@... wrote:

                  > Sounds like fun...sorry I can only suggest that you try the Yahoo group
                  > altaircomputerclub. They have some regulars who can help I am sure.
                  >
                  > http://groups.yahoo.com/group/altaircomputerclub/?yguid=101209920
                  >
                  > Bill
                  >
                  > In a message dated 8/27/2005 8:05:55 AM Eastern Standard Time,
                  > ragooman@... writes:
                  >
                  > > Hi,
                  > >
                  > > I tried posting on cctech, but haven't rcvd any replies yet. I was
                  > > wondering if anyone might know where I can get the
                  > > logo artwork reproduced for the front on my Altair 680. This was an
                  > > original computer my late brother bought as a kit back in the 70's. I
                  > > helped him build this and we sure had some fun programming this. I'm
                  > > finally getting around to restoring this. I dug it out from the last
                  > > trip visiting them. All my stuff was stored in their garage since we
                  > > moved.. The logo silkscreen has faded away alot there's nothing left
                  > > that resembles a logo. I was hoping there is some way to restore this,
                  > > either by replacing the front panel or getting this repainted(or
                  > > silkscreened). In the meantime, I can get the hardware cleaned up and
                  > > hopefully get this to run again.
                  > >
                  > > thanks,
                  > > =Dan
                  >
                  >
                  > SPONSORED LINKS
                  > Vintage computer
                  > <http://groups.yahoo.com/gads?t=ms&k=Vintage+computer&w1=Vintage+computer&w2=30th+anniversary&w3=Computer+security&w4=Computer+training&w5=Swap+meet&c=5&s=105&.sig=QM0hvMZiYa-7CzLVaYw-uQ>
                  > 30th anniversary
                  > <http://groups.yahoo.com/gads?t=ms&k=30th+anniversary&w1=Vintage+computer&w2=30th+anniversary&w3=Computer+security&w4=Computer+training&w5=Swap+meet&c=5&s=105&.sig=jQj2GkQMOlbp-6FXRaJpTg>
                  > Computer security
                  > <http://groups.yahoo.com/gads?t=ms&k=Computer+security&w1=Vintage+computer&w2=30th+anniversary&w3=Computer+security&w4=Computer+training&w5=Swap+meet&c=5&s=105&.sig=VKVygTWn4FQhiwaamoNSYw>
                  >
                  > Computer training
                  > <http://groups.yahoo.com/gads?t=ms&k=Computer+training&w1=Vintage+computer&w2=30th+anniversary&w3=Computer+security&w4=Computer+training&w5=Swap+meet&c=5&s=105&.sig=_hsA8xQt79XjZhXDT8M5vw>
                  > Swap meet
                  > <http://groups.yahoo.com/gads?t=ms&k=Swap+meet&w1=Vintage+computer&w2=30th+anniversary&w3=Computer+security&w4=Computer+training&w5=Swap+meet&c=5&s=105&.sig=K3w9vecEjetUoFaqdQe3DA>
                  >
                  >
                  >
                  > ------------------------------------------------------------------------
                  > YAHOO! GROUPS LINKS
                  >
                  > * Visit your group "midatlanticretro
                  > <http://groups.yahoo.com/group/midatlanticretro>" on the web.
                  >
                  > * To unsubscribe from this group, send an email to:
                  > midatlanticretro-unsubscribe@yahoogroups.com
                  > <mailto:midatlanticretro-unsubscribe@yahoogroups.com?subject=Unsubscribe>
                  >
                  > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
                  > Service <http://docs.yahoo.com/info/terms/>.
                  >
                  >
                  > ------------------------------------------------------------------------
                  >
                  >------------------------------------------------------------------------
                  >
                  >No virus found in this incoming message.
                  >Checked by AVG Anti-Virus.
                  >Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                  >
                  >


                  --
                  No virus found in this outgoing message.
                  Checked by AVG Anti-Virus.
                  Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                • Dan
                  Hi, I saw from an earlier post on Altair Computer Club about using PhotoEZ to silkscreen front panels. That looks so great to use and easy to handle. I m going
                  Message 8 of 10 , Aug 28, 2005
                  • 0 Attachment
                    Hi,

                    I saw from an earlier post on Altair Computer Club about using PhotoEZ
                    to silkscreen front panels. That looks so great to use and easy to
                    handle. I'm going to get some of this to restore my other machines too.
                    But now I have to find somebody who has scanned a good version of the
                    front panel for an Altair 680. I hope someone who has one could offer this.
                    http://www.photoezsilkscreen.com/

                    =Dan

                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                    [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
                    [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
                    [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



                    Dan wrote:

                    > Hi,
                    >
                    > I tried posting on cctech, but haven't rcvd any replies yet. I was
                    > wondering if anyone might know where I can get the
                    > logo artwork reproduced for the front on my Altair 680. This was an
                    > original computer my late brother bought as a kit back in the 70's. I
                    > helped him build this and we sure had some fun programming this. I'm
                    > finally getting around to restoring this. I dug it out from the last
                    > trip visiting them. All my stuff was stored in their garage since we
                    > moved.. The logo silkscreen has faded away alot there's nothing left
                    > that resembles a logo. I was hoping there is some way to restore this,
                    > either by replacing the front panel or getting this repainted(or
                    > silkscreened). In the meantime, I can get the hardware cleaned up and
                    > hopefully get this to run again.
                    >
                    > thanks,
                    > =Dan
                    >
                    > --
                    > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                    > [My Corner of Cyberspace
                    > http://ragooman.home.comcast.net/%5d <http://ragooman.home.comcast.net/%5D>
                    > [Pittsburgh Robotics Society
                    > http://www.pghrobotics.org/%5d <http://www.pghrobotics.org/%5D>
                    > [Pittsburgh Vintage Comp.Society
                    > http://groups.yahoo.com/group/pghvintagecomp/%5d
                    > <http://groups.yahoo.com/group/pghvintagecomp/%5D>
                    > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                    >
                    >
                    >
                    > --
                    > No virus found in this outgoing message.
                    > Checked by AVG Anti-Virus.
                    > Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                    >
                    >
                    > ------------------------------------------------------------------------
                    > YAHOO! GROUPS LINKS
                    >
                    > * Visit your group "midatlanticretro
                    > <http://groups.yahoo.com/group/midatlanticretro>" on the web.
                    >
                    > * To unsubscribe from this group, send an email to:
                    > midatlanticretro-unsubscribe@yahoogroups.com
                    > <mailto:midatlanticretro-unsubscribe@yahoogroups.com?subject=Unsubscribe>
                    >
                    > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
                    > Service <http://docs.yahoo.com/info/terms/>.
                    >
                    >
                    > ------------------------------------------------------------------------
                    >
                    >------------------------------------------------------------------------
                    >
                    >No virus found in this incoming message.
                    >Checked by AVG Anti-Virus.
                    >Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                    >
                    >


                    --
                    No virus found in this outgoing message.
                    Checked by AVG Anti-Virus.
                    Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                  • Jim Scheef
                    Dan, If you can draw the logo as mechanical artwork (as in Illustrator) or find it somewhere, it can be produced as a decal. A really good hobby shop can help.
                    Message 9 of 10 , Sep 26, 2005
                    • 0 Attachment
                      Dan,

                      If you can draw the logo as mechanical artwork (as in Illustrator) or find it
                      somewhere, it can be produced as a decal. A really good hobby shop can help.
                      Decals are made for model airplane builders and other modelers, so why not
                      for computers?

                      Jim


                      --- Dan <ragooman@...> wrote:

                      > Hi,
                      >
                      > I tried posting on cctech, but haven't rcvd any replies yet. I was
                      > wondering if anyone might know where I can get the
                      > logo artwork reproduced for the front on my Altair 680. This was an
                      > original computer my late brother bought as a kit back in the 70's. I
                      > helped him build this and we sure had some fun programming this. I'm
                      > finally getting around to restoring this. I dug it out from the last
                      > trip visiting them. All my stuff was stored in their garage since we
                      > moved.. The logo silkscreen has faded away alot there's nothing left
                      > that resembles a logo. I was hoping there is some way to restore this,
                      > either by replacing the front panel or getting this repainted(or
                      > silkscreened). In the meantime, I can get the hardware cleaned up and
                      > hopefully get this to run again.
                      >
                      > thanks,
                      > =Dan
                      >
                      > --
                      >
                      >
                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      > [My Corner of Cyberspace
                      > http://ragooman.home.comcast.net/%5d
                      > [Pittsburgh Robotics Society
                      > http://www.pghrobotics.org/%5d
                      > [Pittsburgh Vintage Comp.Society
                      > http://groups.yahoo.com/group/pghvintagecomp/%5d
                      >
                      >
                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      >
                      >
                      >
                      > --
                      > No virus found in this outgoing message.
                      > Checked by AVG Anti-Virus.
                      > Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005
                      >
                      >
                    • Dan
                      Jim, I can take the pics somebody made (I posted the links earlier) and copy the outline of the logo. But I m not sure how the decal would turn out once it s
                      Message 10 of 10 , Sep 28, 2005
                      • 0 Attachment
                        Jim,

                        I can take the pics somebody made (I posted the links earlier) and copy
                        the outline of the logo. But I'm not sure how the decal would turn out
                        once it's on the front panel. I'm kinda use to the painted look. I use
                        decals all the time when building models but I didn't try them as a
                        replacement yet.
                        thanks for the tip.

                        =Dan

                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                        [My Corner of Cyberspace http://ragooman.home.comcast.net/%5d
                        [Pittsburgh Robotics Society http://www.pghrobotics.org/%5d
                        [Pittsburgh Vintage Comp.Society http://groups.yahoo.com/group/pghvintagecomp/%5d
                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



                        Jim Scheef wrote:

                        > Dan,
                        >
                        > If you can draw the logo as mechanical artwork (as in Illustrator) or
                        > find it
                        > somewhere, it can be produced as a decal. A really good hobby shop can
                        > help.
                        > Decals are made for model airplane builders and other modelers, so why not
                        > for computers?
                        >
                        > Jim
                        >
                        >
                        > --- Dan <ragooman@...> wrote:
                        >
                        > > Hi,
                        > >
                        > > I tried posting on cctech, but haven't rcvd any replies yet. I was
                        > > wondering if anyone might know where I can get the
                        > > logo artwork reproduced for the front on my Altair 680. This was an
                        > > original computer my late brother bought as a kit back in the 70's. I
                        > > helped him build this and we sure had some fun programming this. I'm
                        > > finally getting around to restoring this. I dug it out from the last
                        > > trip visiting them. All my stuff was stored in their garage since we
                        > > moved.. The logo silkscreen has faded away alot there's nothing left
                        > > that resembles a logo. I was hoping there is some way to restore this,
                        > > either by replacing the front panel or getting this repainted(or
                        > > silkscreened). In the meantime, I can get the hardware cleaned up and
                        > > hopefully get this to run again.
                        > >
                        > > thanks,
                        > > =Dan
                        > >
                        > > --
                        > >
                        > >
                        > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                        > > [My Corner of Cyberspace
                        > > http://ragooman.home.comcast.net/%5d
                        > <http://ragooman.home.comcast.net/%5D>
                        > > [Pittsburgh Robotics Society
                        > > http://www.pghrobotics.org/%5d <http://www.pghrobotics.org/%5D>
                        > > [Pittsburgh Vintage Comp.Society
                        > > http://groups.yahoo.com/group/pghvintagecomp/%5d
                        > <http://groups.yahoo.com/group/pghvintagecomp/%5D>
                        > >
                        > >
                        > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                        > >
                        > >
                        > >
                        > > --
                        > > No virus found in this outgoing message.
                        > > Checked by AVG Anti-Virus.
                        > > Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date:
                        > 8/26/2005
                        > >
                        > >
                        >
                        >
                        > ------------------------------------------------------------------------
                        > YAHOO! GROUPS LINKS
                        >
                        > * Visit your group "midatlanticretro
                        > <http://groups.yahoo.com/group/midatlanticretro>" on the web.
                        >
                        > * To unsubscribe from this group, send an email to:
                        > midatlanticretro-unsubscribe@yahoogroups.com
                        > <mailto:midatlanticretro-unsubscribe@yahoogroups.com?subject=Unsubscribe>
                        >
                        > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
                        > Service <http://docs.yahoo.com/info/terms/>.
                        >
                        >
                        > ------------------------------------------------------------------------
                        >
                        >------------------------------------------------------------------------
                        >
                        >No virus found in this incoming message.
                        >Checked by AVG Anti-Virus.
                        >Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date: 9/23/2005
                        >
                        >


                        --
                        No virus found in this outgoing message.
                        Checked by AVG Anti-Virus.
                        Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: 9/26/2005
                      Your message has been successfully submitted and would be delivered to recipients shortly.