Loading ...
Sorry, an error occurred while loading the content.

30841Re: [midatlanticretro] Decent terminal emulator program for CP/M?

Expand Messages
  • Richard Cini
    May 19, 2013
    • 0 Attachment
      Thanks guys. I think I have Modem 7 laying around also. From the read of the code, UK7 is a slight re-write/split from MDM736. IMP I haven't seen before.

      Ok, at least I'm on the right track here. Thanks!

      Rich

      --
      Rich Cini
      Collector of Classic Computers
      Build Master and lead engineer, Altair32 Emulator


      From: Dave McGuire <Mcguire@...>
      Reply-To: "midatlanticretro@yahoogroups.com" <midatlanticretro@yahoogroups.com>
      Date: Sunday, May 19, 2013 3:54 PM
      To: "midatlanticretro@yahoogroups.com" <midatlanticretro@yahoogroups.com>
      Subject: Re: [midatlanticretro] Decent terminal emulator program for CP/M?

       


      MDM740 is a release of MODEM7. ;)

      I liked MEX at first (digging into very dusty neurons here) but found
      it to be a bit unstable so I went back to MODEM7 (specifically MDM740!).

      In my quest to explore something new, I happened upon MDM800, which
      was not (as one might assume) just a later release of MDM740, but it was
      a bit of a fork. I recall thinking that it was very good, but I no
      longer recall why; this was ~30 years ago.

      All very good software.

      There was also the MDM900 branch, MDM904 maybe? But I recall nothing
      about that, only that it existed and I did run it briefly. I think I
      stuck mainly with MDM800 when I found it and got it running.

      This was all on my S-100 CP/M system; a CCS Z80 board supported by a
      bunch of others...some TDL I/O boards, a Tarbell floppy controller, etc
      all in an IMSAI-8080 chassis. I still have that system, but the drives
      (Shugart SA-801s) and my big box of floppies were lost many years ago.
      (including my oft-consulted "GIRLS.DBF" database that I built under
      dBase-II to catalog all the hotties in my high school! ;))

      I've never heard of IMP, at least not that I recall now. Do you
      still have a copy, or can I find it "around" somewhere? I'd like to see
      what it's about.

      -Dave

      On 05/19/2013 03:45 PM, Mike Loewen wrote:
      >
      > Alternatives are MEX, IMP and MDM740. All use ASM overlays to
      > customize for your system's serial port and video attributes. I believe I
      > settled on IMP as my primary telecomm utility in the CP/M days.
      >
      > On Sun, 19 May 2013, Dave McGuire wrote:
      >
      >>
      >> MODEM7 was the de-facto standard in the CP/M world. Works great.
      >>
      >> -Dave
      >>
      >> --
      >> Dave McGuire, AK4HZ
      >> New Kensington, PA
      >>
      >>
      >> On May 19, 2013, at 9:08 AM, Richard Cini <rich.cini@...> wrote:
      >>
      >>>
      >>>
      >>> All --
      >>>
      >>> Can anyone recommend a terminal emulator program for CP/M? I've finally gotten around to doing a vintage machine BBS "test" and was looking for recommendations. Standard CP/M 2.2 with a CompuPro Interfacer 1 and a Hayes Smartmodem 300. I found a program in the CPMUG archive called "UK7" which has some promise but even something in MBASIC would be adequate.
      >>>
      >>> Thanks!
      >>>
      >>> Rich
      >>>
      >>> --
      >>> Rich Cini
      >>> Collector of Classic Computers
      >>> Build Master and lead engineer, Altair32 Emulator
      >>> http://www.classiccmp.org/cini
      >>> http://www.classiccmp.org/altair32
      >>>
      >>>
      >>>
      >>>
      >>
      >
      > Mike Loewen mloewen@...
      > Old Technology http://sturgeon.css.psu.edu/~mloewen/Oldtech/
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >

      --
      Dave McGuire, AK4HZ
      New Kensington, PA

    • Show all 8 messages in this topic