29910Re: D-I-Y front panel?
- Mar 27, 2013--- In firstname.lastname@example.org, "hornbetw" <hornbetw@...> wrote:
>The April 2013 issue of Nuts & Volts has Part 1 of a 2 part article on making front panels.
> --- In email@example.com, "Jeff Jonas" <jeff_s_jonas@> wrote:
> > A friend asks if this will work. Corey?
> > Create an image in color/B&W for both the control labels
> > and the drill/cut guides, reverse it, and print it on inkjet film.
> > Use permanent spray adhesive (on the ink/image side)
> > and carefully apply it to the panel.
> Print the panel on regular paper and laminate it. You can get sheets to do it yourself or go to Staples, etc. Trim laminated sheet to size and attach with spray adhesive. Used to do it all the time at my old job to make test sets.
- << Previous post in topic Next post in topic >>