21026RE: [midatlanticretro] solution to replacing rubber pad of asr 33 print hammer
- Apr 30, 2011Glad to hear this works.
At 07:56 PM 4/30/2011, you wrote:
That is one common solution. The other, that I have used, is to use an adhesive backed
rubber foot. At the suggestion of a local RTTY guy, I added heat shrink tube over the
hammer and foot to be sure the foot remains in place. This has worked and the shrink
tube shows no sign of wear so far. There is no sign of any damage to the type cylinder.
I�ve used maybe a quarter roll of paper.
From: email@example.com [ mailto:firstname.lastname@example.org] On Behalf Of B Degnan
Sent: Saturday, April 30, 2011 6:40 PM
Subject: [midatlanticretro] solution to replacing rubber pad of asr 33 print hammer
I bought a foot of 3/8" OD 1/4" ID plastic tubing from the hardware store and inserted over the print hammer head (with the old rubber pad removed). Seems to work great...any comments? Anyone done this see any long-term damage?
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1321 / Virus Database: 1500/3607 - Release Date: 04/30/11
- << Previous post in topic Next post in topic >>