Loading ...
Sorry, an error occurred while loading the content.

Re: [micbuilders] Re: question about schematic

Expand Messages
  • Keith Luke
    Roger, When I took my mics to the studio, the piano was set up for studio sessions over several days. I just used the existing set up which was an x/y
    Message 1 of 14 , Jun 1, 2006
    • 0 Attachment
      Roger,

      When I took my mics to the studio, the piano was set up for studio sessions
      over several days. I just used the existing set up which was an x/y
      configuration.

      --- krokavadet <roger.barbara@...> wrote:

      > Hello Keith,
      >
      > I am a bit confused, set up as X-Y when these capsules are omnis?
      > That would mean a mono signal from a stereo pair. A-B ought to be
      > more suitable...
      >
      > Roger
      >
      >
      >
      > --- In micbuilders@yahoogroups.com, Keith Luke <Keith_Luke@...>
      > wrote:
      > >
      > > I made a few mics using project93 and posted the sound clips at my
      > website.
      > > For newcomers (after Jan, 2005), you can audition the clips here:
      > >
      > > http://www.k2l2.net/pianoclips.html
      > >
      > > I compared the project 93 mic against my friend's Earthworks M30
      > and it
      > > compares quite favorably. Using a pink noise source and SMAART
      > Live, we found
      > > that P93 has about 6 - 8 dB more output than M30. ESP Audio
      > offered a circuit
      > > mod which will reduce P93's output if desired. When I asked ESP
      > about the
      > > bandwidth of the P93 preamp I was told it was not an issue, but
      > then I pressed
      > > for 'real numbers' and was told that the bandwidth is from DC to
      > 300 KHz!!!
      >
      >
      >
      >


      __________________________________________________
      Do You Yahoo!?
      Tired of spam? Yahoo! Mail has the best spam protection around
      http://mail.yahoo.com
    Your message has been successfully submitted and would be delivered to recipients shortly.