Loading ...
Sorry, an error occurred while loading the content.

1009Re: [MetRec] Image intensifier problem

Expand Messages
  • maziek
    Nov 22, 2012
      Hi, I use adjustable precise power supply. XX1332 manual says voltage should be 6,5 - 6,75 V. My p. supply is adjusted to 6,62V.

      best, maziek

      2012/11/22 Ed Majden <epmajden@...>

          I've also had this happen.  Are you using a battery or adjustable regulated power supply?  If the latter, turn up the voltage slightly, not too much.  That seems to work for me.  Let me know if that helps.
      ----- Original Message -----
      From: maziek
      Sent: Thursday, November 22, 2012 11:44 AM
      Subject: [MetRec] Image intensifier problem



      I have a problem with image intensifier device XX1332 series. From time to time it does not start (output screen does not glow), when voltage is supplied. In this case there is no power consumption at all (no electric current, even very small). Does anybody know anything about this issue?

      best, maziek

    • Show all 4 messages in this topic