FYI most trailer bearings do NOT have grease Zercs and have to be taken out
and "packed" with grease. Repack every year(unless you get a warm bearing
on the road) two years if it only goes to Pennsic. It is not a hard job
only ....Greasy.... I do all my tractors, baler, wagons, rake, cars and
farmer but not an expert on pulling trailers
Oh, absolutely inspect the trailer every time you stop.
Also, touch the bearing caps on your trailer tires every time you get gas.
If they are NOT cool to cold then you need to pack the more with grease.
You will need a grease gun (about $20 at an auto parts store) and know how
to use it with a grease Zerc.
Ito crack the hub and cause the entire wheel assembly to come off. Always
inspect the trailer at every stop, the 5 minutes you use could save a lot.