Loading ...
Sorry, an error occurred while loading the content.

easiest banner stand

Expand Messages
  • Brian Tychonski
    My recommendation is rather simple. but does require hardware. Four two inch utility hinges, one with the pin removed. Cut four board of equal length. Arrange
    Message 1 of 1 , Apr 29 8:24 AM
    • 0 Attachment
      My recommendation is rather simple. but does require hardware. Four two inch utility hinges, one with the pin removed. Cut four board of equal length. Arrange boards thusly
       
                                    |
                                    |
                                    |
                                    |_____________________
                                    |    |
                         ________________|_______|
                                         |
                                         |
                                         |
       
      By placing a hinge on the outside of each over lap, you can remove one hinge pin and the whole thing will fold flat for transport. It should look like this folded.
       
       
      _____________________________
           ________________________________
                 _______________________________
                      ________________________________
       
       
      While I personally would use 3 inch door hinges, two inch utility ones should work. I would opt for the 3 inch ones though and grab the lumber from the Cull lumber bin at Home Depot. At 51 cents for a 4 ft piece of wood, it's the best bargain out there. I'd grab some 1x4 or 1x6 stock and slap it together from that. If you really want to minimize the required woodworking skill, buy a full length board at HD or Lowes and have them cut it to length. Then all you have to be able to do is use a screw driver. Beside being sturdier, a 1x6 can be cut on an angle with a jigsaw or into an decorative shape for a fancier look. HMMMM, maybe I should make a few for my webpage.
       
      Just my 2 cents worth
       
      Brian Broadxe
    Your message has been successfully submitted and would be delivered to recipients shortly.